Close
Solution
Install the software on a computer meeting the following minimum requirements.
Windows
| OS | Windows Vista (including Service Pack 1, Service Pack 2) Windows XP Service Pack 2, Service Pack 3 (Windows XP Service Pack 1 is not supported.) |
| Configuration | The above OS should be pre-installed on computers with built-in USB ports. |
| CPU | Pentium 1.3 GHz or higher |
| RAM | Windows Vista : 1 GB or more Windows XP : 512 MB or more |
| Interface | USB |
| Free Hard Disk Space | 120 MB or more* |
| Display | 1,024 x 768 pixels or more |
Macintosh
| OS | Mac OS X v10.4 - v10.5 |
| Configuration | The above OS should be pre-installed on computers with built-in USB ports. |
| CPU | PowerPC G4 / G5 or Intel Processor |
| RAM | 512 MB or more |
| Interface | USB |
| Free Hard Disk Space | 140 MB or more |
| Display | 1,024 x 768 pixels or more |
Caution
A CD-ROM drive is required to install the software.
Even when system requirements are met, not all computer functions can be guaranteed.
The printer may not operate correctly if it is connected to a computer via a USB hub.
The printer may not function properly if other USB devices (with the exception of a USB mouse or USB keyboard) are used at the same time. Disconnect any other USB devices from your computer and then reconnect the printer.
Do not put your computer into the standby mode (or sleep mode) while the printer is connected to the computer's USB port. If you accidentally do so, awaken the computer from the standby mode without disconnecting the USB cable.
For details on how to awaken the computer refer to the user guide provided with your computer.