Details of changes made to the firmware Firmware Version 1.1 incorporates the following improvements:
1. Adds YRGB to "Select Signal" for "Wave Form Monitor" to enable the simultaneous display of Y/R/G/B signal wave forms within the same screen. 2. Adds the ability to display the xy chromaticity values of all pixels in input images on a chromaticity diagram. 3. Adds "Multi Information View", which displays all kinds of signal information including wave form monitors and chromaticity diagrams without overlapping them on an image. 4. Adds "Frame Luminance Monitor," which displays maximum/average luminance values for input signals and their switching, etc. 5. Adds a "Histogram" that displays input image luminance frequency distribution. 6. Adds the ability to mix and display*1 images with both SDI and HDMI signals. 7. Adds the ability to have different image quality settings when displaying Dual/QuadView*1. 8. Adds the ability to have comparative display compatible with 4 types of different user LUT when displaying QuadView*1. 9. Adds the ability to use a remote control through a wired LAN connection to control the display using a PC or tablet devices, etc. 10. Adds a "Display Setting Link" function, which enables the synchronous setting of multiple displays that are connected using wired LAN. 11. Adds SD-SDI signal to input compatible signals. 12. Adds the ability to export/import settings via a wired LAN connection. 13. Adds "Switch Out*2" function , which allows selection of an arbitrary image from images (maximum of 4 images), including 4K/60P from a SDI input jack and outputs it from the "MULTIFUNC. SDI OUT" jack. 14. Ability to set "Gain R/G/B" and "Bias R/G/B" of "Color Temperature" in common with picture mode. 15. Adds the ability to set a "Marker Preset" for each channel. 16. The "H Offset" setting range, which specifies the display position of the "Time Code", has been extended so it can be displayed in the center of the screen. 17. Adds the ability to simultaneously displace the "Wave Form Monitor" and "Vector Scope" on the left and right sides when displaying DualView.
*1: There are display limitations that are due to the resolution, frame rate and transmission method, etc., of the input image. *2: A purchasable upgrade license is needed to enable the switch out function. Please contact your local distributor for all inquiries regarding purchasable upgrade licenses.
Firmware Version 1.1 is for the DP-V1830 4K Reference Display running Firmware Version 1.0. If the Reference Display's firmware is already version 1.1, it is not necessary to update the firmware.
Preparations for updating the firmware It is recommended that current settings are exported before attempting to update the firmware. Once the firmware is updated, settings can be imported back to the display. The downloaded folder contains the new firmware. (Filename: "update_dpv1830.rom", file size: 36,075,021 bytes) It also contains the firmware update procedure document (multilingual PDF file in following languages: Japanese, English, French, German and Chinese (simplified characters). Before proceeding to update the firmware, please read the firmware update procedure document.
Software Used in This Product Software installed with this product includes software modules from Canon or third parties.
Software Developed by Canon and Free Software Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws. This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License v2 and v3 (GPL), GNU Lesser General Public License v2.1 (LGPL) or any other license.
System requirements
The following items are required to perform the firmware update: 1. Video Display unit 2. Personal computer 3. USB memory (FAT16, FAT32 or exFAT) 4. Firmware (The downloaded file)
File information
File Name : DP-V1830-V110.zip File Type : FA File Size : 40439953KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.
Close
