How do I shoot movies? (PowerShot SX510 HS)

The details on how to shoot movies are described below.

You can press the movie button, and the camera will start recording movies automatically.

Caution

Avoid touching camera controls other than the ⋖Movie button⋗ () when shooting movies, because sounds made by the camera will be recorded.

Before shooting a movie, lower the flash with your finger. Be careful not to touch the microphone when shooting a movie. Leaving the flash raised, or blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled.

1. Press the ⋖Power⋗ button to turn the camera on.

2. The following screen appears.

The maximum shooting duration appears on the [LCD Monitor].

If it does not appear, press the ⋖⋗ button several times.

3. Point the camera at the subject, and turn the ⋖Zoom Lever⋗ to compose the shot.

4. Press the ⋖Movie Button⋗ () to start shooting.

When the camera starts shooting [Elapsed Time] and [Rec] appear on the [LCD Monitor].

Once shooting begins, take your finger off the ⋖Movie Button⋗ ().

Caution

5. Press the ⋖Movie Button⋗ () again to stop shooting.

The camera beeps twice as recording stops.

Caution

Audio is recorded in stereo.

Distorted audio caused by recording when the wind is strong can be reduced. However, the recording may sound unnatural when this option is used when there is no wind. When the wind is not strong, press the ⋖ ⋗ button, choose [Wind Filter] on the [ ] tab, and then choose [Off].