Video Output Signals by Terminal (XF105/XF100)

The video signal output from the HD/SD SDI (), HDMI OUT and HD/SD COMPONENT OUT terminals depends on the clip’s video configuration, the capability of the external monitor (for video output from the HDMI OUT terminal) and on various menu settings. Video output from the AV terminal will always be in 576/50i standard.

Video Output Signals by Terminal

Refer to the following table for the video output Signal from each terminal. If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor.

Recording frame size / Frame rate	HD/SD SDI Terminal(*1)(*2)		HDMI OUT Terminal(*2)(*3)		HD/SD COMPONENT OUT Terminal(*2)(*4)		AV Terminal
	HD output	SD output	HD output	SD output	HD output	SD output	SD output
1080/50i 1080/25P 1080/slow or fast motion	1080/50i	576/50i(*5)	1080/50i	576/50P	1080/50i	576/50i	576/50i
720/50P 720/25P 720/slow or fast motion	720/50P	576/50i(*5)	720/50P	576/50P	720/50P	576/50i	576/50i

*1: Set [Video Setup] -⋗ [SDI Output] to [HD], [SD] or [Off].

*2: When you set [LCD/VF Setup] -⋗ [HD Output] (under [Zebra]) to [On], you can display zebra patterns on an external monitor. In such case, output from the HD/SD SDI terminal ( only) and HD/SD COMPONENT OUT terminal will be in HD, regardless of their setting.

*3: Video output will automatically switch to HD or SD, depending on the capability of the external monitor.

*4: Set [NVideo Setup] -⋗ [Component Output] to [HD] or [SD].

*5: When output from the HDMI OUT terminal is SD (576/50P), the output of the HD/SD SDI terminal will also be 576/50P.

Caution