Registering a Paper Size and Type

When using Drawer 1 or the multi-purpose tray, you need to register the size of the loaded paper because this printer cannot automatically detect the paper size.

When using the optional paper drawer (Drawer 2), register a paper size only in the following cases because the optional paper drawer is configured to automatically detect the paper size by default.

Also, it is necessary to set the paper type to match the type of paper that is loaded.

Register the paper size using the following procedure. (The paper size setting is set to [A4] by default.)

Caution

1. Press [ ] (: Feeder Selection).

2. Select the paper source using [ ] and [ ], and then press [OK].

Select either [MP Tray Paper Size], [Drawer 1 Size] or [Drawer 2 Size].

3. Select a paper size using [ ] and [ ], and then press [OK].

→ Paper size is registered.

4. Select the paper source whose type is to be registered using [ ] and [ ], and press [OK].

Select either [MP Tray Paper Type], [Drawer 1 Type] or [Drawer 2 Type].

* Since the printer driver's [Paper Type] default value is [Printer Default], it is normally not necessary to change the printer driver settings.

Whenever you change the printer driver settings, match them with the paper settings on the control panel.

5. Select the paper type with [ ] or [ ], and then press [OK].

→ The paper type is registered.