Solution
Registering Fax Numbers in One-TouchRegistering E-Mail Addresses in One-Touch
Registering I-Fax Addresses in One-Touch
Registering File Server Addresses in One-Touch
Registering Group Addresses in One-Touch
Checking/Editing Addresses Registered in One-Touch
Erasing Addresses Registered in One-Touch
Storing fax numbers, e-mail addresses, I-fax addresses, and file server addresses in one-touch enables you to easily specify destinations. You can also register multiple destinations for a group address.
Registering a destination in one-touch saves you efforts for entering the above destinations each time you send a job.
You can register up to 200 destinations in one-touch.
Caution
Registering Fax Numbers in One-Touch
Caution
This section describes how to register destinations from the Additional Functions screen. You can also register destinations from the Select Send Type screen, as follows:
1. Press (Main Menu).
2. Press the right Any key to select ⋖Additional Func.⋗.
3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Address Book Settings⋗, then press [OK].
If a password has been set for the Address Book, enter the password to enter Address Book Settings menu. Enter the password using - (numeric keys), then press [OK].
4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch⋗, then press [OK].
5. Use [ ] , [ ] or (Scroll Wheel) to select the one-touch you want to register, then press [OK].
6. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Fax⋗, then press [OK].
7. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register Name⋗, then press [OK].
8. Use the software keyboard to enter the recipient's name.
You can enter up to 16 characters for the recipient's name.
Caution
Registered destinations are sorted in the Address Book by its recipient's name, in alphabetical order.
9. If you are finished, press the right Any key to select ⋖Set⋗.
10. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch Name⋗, then press [OK].
11. Use the software keyboard to enter the one-touch name.
You can enter up to 12 characters for the one-touch name.
12. If you are finished, press the right Any key to select ⋖Set⋗.
13. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Destination Registration⋗, then press [OK].
14. Use - (numeric keys) to enter the fax number.
Caution
15. If you want to set the ECM TX, sending speed, and long distance settings, press the right Any key to select ⋖Option⋗.
These settings are optional. If you do not want to set the optional settings, skip to step 23.
16. Use [ ] , [ ] or (Scroll Wheel) to select ⋖ECM TX⋗, then press [OK].
17. Use [ ] , [ ] or (Scroll Wheel) to select ⋖On⋗ or ⋖Off⋗, then press [OK].
18. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Sending Speed⋗, then press [OK].
19. Use [ ] , [ ] or (Scroll Wheel) to select the sending speed, then press [OK].
If your document transmissions are slow to start, it may mean that the telephone lines in your area are in poor condition. Select a slower speed. You can select ⋖33600 bps⋗, ⋖14400 bps⋗, ⋖9600 bps⋗, or ⋖4800 bps⋗.
20. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Long Distance⋗, then press [OK].
21. Use [ ] , [ ] or (Scroll Wheel) to select the long distance setting, then press [OK].
Select ⋖Domestic⋗ for dialing domestic (local) telephone numbers. Select ⋖Long Distance (1)⋗ if communication errors frequently occur when you make overseas calls (when the overseas telephone number is registered in the Address Book). If errors persist, try selecting ⋖Long Distance (2)⋗ or ⋖Long Distance (3)⋗.
22. Press the right Any key to select ⋖Done⋗.
23. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Set Destination⋗, then press [OK].
24. Press the right Any key to select ⋖Register⋗.
If you want to register another fax number, repeat from step 5.
25. Press the right Any key to select ⋖Done⋗.
26.Press (Main Menu) to return to the Main Menu screen.
Registering E-Mail Addresses in One-Touch
Caution
- In the Select Send Type screen, press the right Any key to select ⋖One-touch⋗.
- Press the left Any key to select ⋖Reg/Edit/Erase⋗.
- Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register New Dest. to One-touch⋗, then press [OK].
- Follow the procedure described in this section from step 5.
1. Press (Main Menu).
2. Press the right Any key to select ⋖Additional Func.⋗.
3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Address Book Settings⋗, then press [OK].
If a password has been set for the Address Book, enter the password to enter Address Book Settings menu. Enter the password using - (numeric keys), then press [OK].
4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch⋗, then press [OK].
5. Use [ ] , [ ] or (Scroll Wheel) to select the one-touch you want to register, then press [OK].
6. Use [ ] , [ ] or (Scroll Wheel) to select ⋖E-mail⋗, then press [OK].
7. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register Name⋗, then press [OK].
8. Use the software keyboard to enter the recipient's name.
You can enter up to 16 characters for the recipient's name.
Caution
Registered destinations are sorted in the Address Book by its recipient's name, in alphabetical order.
9. If you are finished, press the right Any key to select ⋖Set⋗.
10. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch Name⋗, then press [OK].
11. Use the software keyboard to enter the one-touch name.
You can enter up to 12 characters for the one-touch name.
12. If you are finished, press the right Any key to select ⋖Set⋗.
13. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Destination Registration⋗, then press [OK].
14. Use the software keyboard to enter the recipient's e-mail address.
You can enter up to 120 characters for the e-mail address.
15. If you are finished, press the right Any key to select ⋖Set⋗.
16. Press the right Any key to select ⋖Register⋗.
If you want to register another e-mail address, repeat from step 5.
17. Press the right Any key to select ⋖Done⋗.
18. Press (Main Menu) to return to the Main Menu screen.
Registering I-Fax Addresses in One-Touch
Caution
This section describes how to register destinations from the Additional Functions screen. You can also register destinations from the Select Send Type screen, as follows:
1. Press (Main Menu).
2. Press the right Any key to select ⋖Additional Func.⋗.
3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Address Book Settings⋗, then press [OK].
If a password has been set for the Address Book, enter the password to enter Address Book Settings menu. Enter the password using - (numeric keys), then press [OK].
4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch⋗, then press [OK].
5. Use [ ] , [ ] or (Scroll Wheel) to select the one-touch you want to register, then press [OK].
6. Use [ ] , [ ] or (Scroll Wheel) to select ⋖I-Fax⋗, then press [OK].
7. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register Name⋗, then press [OK].
8. Use the software keyboard to enter the recipient's name.
You can enter up to 16 characters for the recipient's name.
Caution
Registered destinations are sorted in the Address Book by its recipient's name, in alphabetical order.
9. If you are finished, press the right Any key to select ⋖Set⋗.
10. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch Name⋗, then press [OK].
11. Use the software keyboard to enter the one-touch name.
You can enter up to 12 characters for the one-touch name.
12. If you are finished, press the right Any key to select ⋖Set⋗.
13. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Destination Registration⋗, then press [OK].
14. Use the software keyboard to enter the recipient's I-fax address.
You can enter up to 120 characters for the I-fax address.
15. If you are finished, press the right Any key to select ⋖Set⋗.
16. Press the right Any key to select ⋖Register⋗.
If you want to register another I-fax address, repeat from step 5.
17. Press the right Any key to select ⋖Done⋗.
18. Press (Main Menu) to return to the Main Menu screen.
Registering File Server Addresses in One-Touch
Caution
- In the Select Send Type screen, press the right Any key to select ⋖One-touch⋗. Or, in the Select Store Type screen, use [ ] , [ ] or (Scroll Wheel) to select ⋖Store on File Server⋗, press [OK], then press the right any key to select ⋖One-touch⋗.
- Press the left Any key to select ⋖Reg/Edit/Erase⋗.
- Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register New Dest. to One-touch⋗, then press [OK].
- Follow the procedure described in this section from step 5.
1. Press (Main Menu).
2. Press the right Any key to select ⋖Additional Func.⋗.
3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Address Book Settings⋗, then press [OK].
If a password has been set for the Address Book, enter the password to enter Address Book Settings menu. Enter the password using - (numeric keys), then press [OK].
4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch⋗, then press [OK].
5. Use [ ] , [ ] or (Scroll Wheel) to select the one-touch you want to register, then press [OK].
6. Use [ ] , [ ] or (Scroll Wheel) to select ⋖File⋗, then press [OK].
7. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register Name⋗, then press [OK].
8. Use the software keyboard to enter the file server name.
You can enter up to 16 characters for the file server name.
Caution
Registered destinations are sorted in the Address Book by its recipient's name, in alphabetical order.
9. If you are finished, press the right Any key to select ⋖Set⋗.
10. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch Name⋗, then press [OK].
11. Use the software keyboard to enter the one-touch name.
You can enter up to 12 characters for the one-touch name.
12. If you are finished, press the right Any key to select ⋖Set⋗.
13. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Destination Registration⋗, then press [OK].
14. Use [ ] , [ ] or (Scroll Wheel) to select a server protocol, then press [OK].
Caution
After turning the main power ON, you must wait for the time set in the Startup Time Settings to elapse before selecting ⋖Windows (SMB): Browse⋗. Network transmission is not possible until this startup time has elapsed.
If you select ⋖FTP⋗ or ⋖Windows (SMB)⋗:
1. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Host Name⋗, then press [OK].
2. Use the software keyboard to enter the host name.
You can enter up to 120 characters (47 characters if ⋖FTP⋗ is selected) for the host name.
Caution
A host name is a unique name assigned to identify each host computer that provides services on the Internet. In this entry box, enter the name of the file server on the network as the destination of the send job.
3. If you are finished, press the right Any key to select ⋖Set⋗.
4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Folder Path⋗, then press [OK].
5. Use the software keyboard to enter the path to the folder.
You can enter up to 120 characters for the folder path.
Caution
6. If you are finished, press the right Any key to select ⋖Set⋗.
7. Use [ ] , [ ] or (Scroll Wheel) to select ⋖User Name⋗, then press [OK].
8. Use the software keyboard to enter the user name.
You can enter up to 24 characters for the user name.
Caution
If you are sending to an iW Document Manager folder, enter the user name set in iW Gateway.
9. If you are finished, press the right Any key to select ⋖Set⋗.
10. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Password⋗, then press [OK].
11. Use the software keyboard to enter the password.
You can enter up to 24 characters when ⋖FTP⋗ is selected as the server protocol, or up to 14 when ⋖Windows (SMB)⋗ is selected.
Caution
If you are sending to an iW Document Manager folder, enter the password set in iW Gateway.
12. If you are finished, press the right Any key to select ⋖Set⋗.
13. Press the right Any key to select ⋖Set⋗.
14. Press the right Any key to select ⋖Register⋗.
If you select ⋖Windows (SMB): Browse⋗:
1. Use [ ] , [ ] or (Scroll Wheel) to select the desired workgroup, then press [OK].
Caution
If the desired workgroup is not displayed, use [ ] , [ ] or (Scroll Wheel) to scroll to the desired workgroup.
2. Use [ ] , [ ] or (Scroll Wheel) to select the desired file server, then press [OK].
Caution
If the desired file server is not displayed, use [ ] , [ ] or (Scroll Wheel) to scroll to the desired file server.
3. Use [ ] , [ ] or (Scroll Wheel) to select the desired file server, then press the right Any key to select ⋖Set⋗.
Caution
If the Enter Network Password screen is displayed after pressing [OK], enter your user name (up to 24 characters) and network password (up to 14 characters), then press the right Any key to select ⋖Set⋗.
4. Specify the folder name, user name, and password as described from steps 5 to 11 in "If you select ⋖FTP⋗ or ⋖Windows (SMB)⋗."
5. Press the right Any key to select ⋖Done⋗.
6. Press the right Any key to select ⋖Register⋗.
If you want to register another file server address, repeat from step 5.
15. Press the right Any key to select ⋖Done⋗.
16. Press (Main Menu) to return to the Main Menu screen.
Registering Group Addresses in One-Touch
The Group Address feature enables you to create a group of up to 299 stored destinations (199 for the imageCLASS MF9220Cdn) as a single destination.
Caution
- In the Select Send Type screen, press the right Any key to select ⋖One-touch⋗.
- Press the left Any key to select ⋖Reg/Edit/Erase⋗.
- Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register New Dest. to One-touch⋗, then press [OK].
- Follow the procedure described in this section from step 5.
1. Press (Main Menu).
2. Press the right Any key to select ⋖Additional Func.⋗.
3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Address Book Settings⋗, then press [OK].
If a password has been set for the Address Book, enter the password to enter Address Book Settings menu. Enter the password using - (numeric keys), then press [OK].
4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch⋗, then press [OK].
5. Use [ ] , [ ] or (Scroll Wheel) to select the one-touch you want to register, then press [OK].
6. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Group⋗, then press [OK].
7. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register Name⋗, then press [OK].
8. Use the software keyboard to enter the group name.
You can enter up to 16 characters for the group name.
Caution
Registered destinations are sorted in the Address Book by its name, in alphabetical order.
9. If you are finished, press the right Any key to select ⋖Set⋗.
10. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch Name⋗, then press [OK].
11. Use the software keyboard to enter the one-touch name.
You can enter up to 12 characters for the one-touch name.
12. If you are finished, press the right Any key to select ⋖Set⋗.
13. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Destination Registration⋗, then press [OK].
14. Use [ ] , [ ] or (Scroll Wheel) to select the destination to store in the group address, then press [OK].
Caution
15. Repeat step 14 to select all destinations you want to register in the group address, then press the right Any key to select ⋖Set⋗.
16. Press the right Any key to select ⋖Register⋗.
If you want to register another group address, repeat from step 5.
17. Press the right Any key to select ⋖Done⋗.
18. Press (Main Menu) to return to the Main Menu screen.
Checking/Editing Addresses Registered in One-Touch
You can check and edit the details of the destinations registered in one-touch.
Caution
This section describes how to check and edit the details of the destinations from the Additional Functions screen. You can also check and edit the details from the Select Send Type screen, as follows:
1. Press (Main Menu).
2. Press the right Any key to select ⋖Additional Func.⋗.
3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Address Book Settings⋗, then press [OK].
If a password has been set for the Address Book, enter the password to enter Address Book Settings menu. Enter the password using - (numeric keys), then press [OK].
4. Use [ ], [ ] or (Scroll Wheel) to select ⋖Register One-touch⋗, then press [OK].
5. Use [ ] , [ ] or (Scroll Wheel) to select the one-touch you want to check or edit, then press [OK].
Caution
6. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Details/Edit⋗, then press [OK].
7. Check or edit the address details.
If you want to check the address details:
1. Check the details, then press the right Any key to select ⋖Done⋗.
If you want to edit the address details:
1. Use [ ] , [ ] or (Scroll Wheel) to select the item you want to edit, then press [OK].
2. Confirm that ⋖Edit⋗ is selected, then press [OK].
3. Edit the address details.
Follow the same procedure as you used when registering destinations.
4. Press the right Any key to select ⋖Done⋗.
8. Press (Main Menu) to return to the Main Menu screen.
Erasing Addresses Registered in One-Touch
Caution
This section describes how to erase one-touch destinations from the Additional Functions screen. You can also erase them from the Select Send Type screen, as follows:
1. Press (Main Menu).
2. Press the right Any key to select ⋖Additional Func.⋗.
3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Address Book Settings⋗, then press [OK].
If a password has been set for the Address Book, enter the password to enter Address Book Settings menu. Enter the password using - (numeric keys), then press [OK].
4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Register One-touch⋗, then press [OK].
5. Use [ ] , [ ] or (Scroll Wheel) to select the one-touch you want to erase, then press [OK].
Caution
6. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Erase⋗, then press [OK].
7. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Yes⋗, then press [OK].
If you want to cancel erasing the destination, select ⋖No⋗.
8. Press (Main Menu) to return to the Main Menu screen.