EOS R6 Mark II Firmware Update, Version 1.4.0 [Windows]

Content Id: 0400961702

Description

Detail

Firmware Version 1.4.0 incorporates the following enhancements and fixes:
1. [No. of shots] in [Interval timer] can now be set up to 9999.
2. Adds [FEM] to [Flash C.Fn settings]. Also, adds [ON/ETTL→M] to [Customize buttons]. Enables the ability to set Flash exposure memory (FE memory) from the camera when using Speedlites without an LCD panel.
3. Adds Protect Images During [FTP Transfer] to the camera menu. Images transferred via FTP can now be automatically protected. The user can determine if images have already been transferred via FTP.
4. The following issues have been fixed.
　4-1. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off.
　4-2. Enhances security for FTPS (File Transfer Protocol Security) connections.
　4-3. Fixes an issue that, under specific circumstances and in rare instances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed.
　4-4. Fixes an issue that may cause the In-Body Image Stabilizer not to initialize when a vibration occurs when the camera is turned on, and Error Code 20 may be displayed.
　4-5. Fixes an issue that may result in Error Code 70 being displayed when the user is shooting in A+ Mode or with the camera set to AI Focus AF.
　4-6. Fixes an issue that may cause the card access lamp to start flashing and the camera to not operate normally when shooting small subjects.
　4-7. Fixes an issue that may cause the camera to continue shooting when the user presses the shutter button and another button at the same time.

If the camera's firmware is already Version 1.4.0, it is not necessary to update the firmware.

Notes:
Users manual in the WEB is updated accordingly. Please download the manual as well as the latest firmware. You can download it from the official WEB site.

Preparations for a firmware update:
After the downloaded compressed file (.zip) is extracted, a firmware folder is created.

*Extracting the downloaded file:
Right-click the zip file, and then select Extract All to extract the file.

In the folder you downloaded are the firmware (R6214000.FIR / file size: 74,802,368 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully review the instructions to confirm your understanding of the firmware update procedures.

(The following is the history of past firmware updates.)

Changes in version 1.3.0:
1. Adds support for RF-S10-18mm F4.5-6.3 IS STM lens.
2. Fixes minor issues.

Changes in version 1.2.0:
1. Adds support for the RF5.2mm F2.8 L Dual Fisheye lens.
2. Adds enhanced security when transferring images via FTPS transfer.
3. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
4. Fixes minor issues.

Changes in version 1.1.2:
1. Improves the stability of the touch operation control when the [Touch control] is set to [Sensitive].
2. Fixes an issue that may result in only one battery being charged when the BG-R10 Battery Grip is attached.

Changes in version 1.1.1:
1. Adds supports for the Speedlite EL-5.
2. Reduces start-up time when the camera’s Bluetooth setting is enabled.
3. Allows FTP/FTPS/SFTP transfers to be completed when using an IPv6 setting.
4. Fixes minor issues.

File information

File Name : eosr62-v140-win.zip
File Type : FA
File Size : 79884713KB