The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as DHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors of the LAN cable are firmly inserted into the ports. You can test the network connection if necessary.
Setting an IPv4 Address
1. Tap ⋖Menu⋗ in the Home screen.
2. Tap ⋖Network Settings⋗.
3. Select ⋖TCP/IP Settings⋗ ⋖IPv4 Settings⋗ ⋖IP Address Settings⋗.
4. Configure IP address settings.
(a) ⋖Auto Acquire⋗
Select to automatically assign an IP address via DHCP protocol. When ⋖Auto Acquire: On⋗ is displayed, automatic addressing is enabled.
(b) ⋖Manually Acquire⋗
Select to configure the IP address settings by manually entering an IP address. In order to select this option, ⋖Auto Acquire⋗ must be set to ⋖Off⋗.
(c) ⋖Check Settings⋗
Select when you want to view the current IP address settings.
Automatically assigning an IP address
4-A-1. Select ⋖Auto Acquire⋗ ⋖Select Protocol⋗.
4-A-2. Tap ⋖DHCP⋗.
NOTE:
If you do not want to use DHCP/BOOTP/RARP to assign an IP address
4-A-3. Check that ⋖Auto IP⋗ is set to ⋖On⋗.
4-A-4. Tap ⋖Apply⋗.
NOTE:
Manually entering an IP address
4-B-1. Check that ⋖Auto Acquire⋗ is set to ⋖Off⋗.
4-B-2. Tap ⋖Manually Acquire⋗.
4-B-3. Specify the IP address, subnet mask, and gateway address (or default gateway).
5. Restart the machine.
Caution
Checking whether the settings are correct
If you changed the IP address after installing the printer driver
Testing the Network Connection
1. Tap ⋖Menu⋗ in the Home screen.
2. Tap ⋖Network Settings⋗.
3. Select ⋖TCP/IP Settings⋗ ⋖IPv4 Settings⋗ ⋖PING Command⋗.
4. Enter the IPv4 address of another device on the network, and tap ⋖Apply⋗.