FAQs & troubleshooting

Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF6400S/iPF8400S)

Content Id: 8201962800

Solution

If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing Adj. Fine Feed during printing to fine-tune the feed amount.

Caution

The Adj. Fine Feed menu is only displayed during printing.

Additionally, it is displayed when you have selected Automatic or Print Quality in Adj. Priority in Feed Priority.

Always execute Adj. Quality before Adj. Fine Feed.

Once you execute Adj. Quality, the Adj. Fine Feed value will revert to 0.

(See "Automatic Banding Adjustment (Adj. Quality) (iPF6400S/iPF8400S)")

(See "Manual Banding Adjustment (Adj. Quality) (iPF6400S/iPF8400S)")

Perform adjustment as follows.

1.On the Tab Selection screen of the Control Panel, press or to select the Settings/Adj. tab ( ).

Caution

If the Tab Selection screen is not displayed, press the Menu button.

2.Press the OK button.

The Set./Adj. Menu is displayed.

3.Press or to select Adj. Fine Feed, and then press the OK button.

4.Press or to select a setting value in the range -5 to 5, and then press the OK button.

At this time, if banding in dark colors appears, select a setting value in the range 1 to 5, and if banding in light colors appears, select a setting value in the range -1 to -5.

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit