Adjustment When Installing the Printhead (iPF6400S/iPF8400S)

Printhead position adjustment is executed when the printhead is first installed.

This adjustment should be executed in the following situations.

Caution

⋖Items to Prepare⋗

When Using Rolls : An unused roll at least 254.0 mm (10.00 in) wide

When Using Sheets : Seven sheets of unused paper, A4/Letter size (or one sheet when using A2)

Perform adjustment as follows.

1.Load paper.

Caution

2.On the Tab Selection screen of the Control Panel, press or to select the Settings/Adj. tab ( ).

Caution

3.Press the OK button.

The Set./Adj. Menu is displayed.

4.Press or to select Adjust Printer, and then press the OK button.

5.Press or to select Head Posi. Adj., and then press the OK button.

6.Press or to select Other, and then press the OK button.

7.Press or to select Initial adjustmt, and then press the OK button.

A test pattern is printed for adjustment.

Adjustment is now finished if you have printed on a roll.

8.If you are printing on sheets, a confirmation message is displayed requesting you to continue printing.

Press the OK button and follow the instructions.

Caution