Details of changes made to the firmware This firmware (Version 1.3.1) includes the following added functions and performance improvements.
1. A function has been added that automatically switches the picture quality settings in accordance with the video resolution (4K/2K) and the metadata (Colorimetry bit of the video payload ID, cinema camera type (CINEMA EOS SYSTEM/ARRI/Panasonic), and HDMI). This enables more practical and efficient operation in environments that use both HDR and SDR. 2. A function has been added that displays the brightness values*1 or RGB values of the input video of the specified pixel position. This enables to check the subject brightness in greater detail. 3. A function has been added that displays the peak and average brightness values*1 or the peak and average gradation values as well as the transition in these values for the entire input video picture (frame). This enables to visually check changes in brightness during video production. 4. A comparison display function has been added that enables HDR/SDR comparison display and CDL/User LUT ON/OFF comparison. This enables left-right picture quality comparison display with the press of a single button. 5. A function has been added that colors areas which are the specified range or more. This enables to visually check the brightness level during HDR shooting. 6. A function has been added to "False Color" that enables to arbitrarily adjust the boundary positions of the brightness coloring range. 7. A function has been added to "2020 Outside of Gamut View" that colors areas outside the native color gamut of the panel. 8. PLUGE and Color Bar test pattern images for HDR signals have been added to "Test Pattern". 9. A function has been added for remotely controlling the display using a Web browser*2. This enables to use a PC, tablet or other device to check and manipulate the displayed video and settings. 10. "2020 PQ to 2020 SDR", "2020 PQ to 709 SDR" and "2020 HLG to 709 HLG" have been added to "CDL/User LUT". This enables display of PQ signals converted to SDR characteristics and display with the PQ/HLG signal color gamut converted to BT.709. 11. The ARRI cinema camera LUTs "ARRI (Rec2100-PQ-1K-100)" and "ARRI (Rec2100-HLG-1K-200)" and the Panasonic cinema camera LUT "VARICAM (V-Log to V-709)" have been added to "User LUT". 12. "Preset Log 1", "Preset Log 2", "ARRI (Rec2100-PQ-1K-100)" and "ARRI (Rec2100-HLG-1K-200)" scale display have been added to "Wave Form Monitor". 13. A function has been added to "Wave Form Monitor" that colors areas outside the ranges set by "Color Range" and "HDR Range". This enables to easily check the areas outside these ranges. 14. A waveform monitor can now be displayed in both the left and right pictures during MultiView (Dual) display. 15. The system gamma can now be adjusted between 1.000 and 1.500 when "Gamma/EOTF" is set to "Hybrid Log-Gamma. 16. The auto setting operation in "Color Range" has been changed to "Full" when "Gamma /EOTF" is set to "Preset Log 1" or "Preset Log 2". 17. "D65-Custom" has been added to "Color Temperature" to enable fine adjustment of the D65 color temperature. 18. Operation when "Color Range" is set to "Limited" has been enhanced so that over-white and under-black areas can be displayed. 19. Anamorphic display can now be zoomed as is. 20. "Gray" to the line display color setting and "Half" to the brightness setting have been added in the "Aspect Marker/Safety Zone Marker 1/Safety Zone Marker 2/Area Marker/Center Marker/Grid Marker" settings. This enables dark display during HDR display. 21. A display size setting has been added to "Center Marker /Audio Level Meter". 22. Horizontal display position adjustment, brightness adjustment, and VITC/LTC display ON/OFF settings have been added to "Time Code". 23. A save format setting has been added so that JPEG format capture is now possible in addition to the previous bitmap format. 24. Other UI and operation performance enhancements have also been made.
*1: Only when "Gamma /EOTF" is set to "SMPTE ST 2084 (PQ)/Hybrid Log-Gamma". (Not supported when "Gamma /EOTF" is set to "Hybrid Log-Gamma RGB".) *2: A Wi-Fi adapter is required when using Wi-Fi.
Please check the firmware version on your display. If it is running Version 1.2 or earlier version, then it should be updated to Version 1.3.1. There is no action necessary if the display's firmware is Version 1.3.1.
Preparations for updating the firmware It is recommended that current settings are exported before attempting to update the firmware. Once the firmware is updated, settings can be imported back to the display. The downloaded folder contains the new firmware. (Filename: "update_dpv2410.rom", file size: 24,371,278 bytes) It also contains the firmware update procedure document (multilingual PDF file in following languages: Japanese, English, French, German and Chinese (simplified characters). Before proceeding to update the firmware, please read the firmware update procedure document.
Software Used in This Product Software installed with this product includes software modules from Canon or third parties.
Software Developed by Canon and Free Software Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws. This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License v2 (GPL), GNU Lesser General Public License v2.1 (LGPL) or any other license.
The following items are required to perform the firmware update: 1. Video Display unit 2. Personal computer 3. USB memory (FAT16 or FAT32) 4. Firmware (The downloaded file)
File Name : DP-V2410-V131.zip File Type : FA File Size : 29024947KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.