Preparation
Before turning on the machine, remove all orange tapes and protective sheets from the inside and outside of the machine.
The FINE Cartridges and power cord are placed inside of the Paper Output Tray (A).
Open the Paper Output Tray with your hands, and take out the FINE Cartridges and power cord.
Caution
A USB cable (A-B type) is necessary to connect the machine with your computer.
Caution
- Choosing a Location
Remove the Protective Material
1. Open the Paper Output Tray (A).
2. Lift the Scanning Unit (Cover) (B) and fix it with the Scanning Unit Support (C).
3. Pull the orange protective tape (D) and remove the protective material (E).
4. Lift the Scanning Unit (Cover) slightly and fold the Scanning Unit Support, then gently close the Scanning Unit (Cover).
Turn the Power On
1. Plug the power cord into the left side of the machine, then connect the other end to the wall outlet.
Caution
2. Turn on the machine (B).
3. Make sure that the POWER lamp (B) lights green.
Install the FINE Cartridges
Caution
1. Lift the Scanning Unit (Cover) (A) and fix it with the Scanning Unit Support (D).
Close the Document Cover (E) and lift it with the Scanning Unit (Cover).
The FINE Cartridge Holder (F) moves to the installation position.
Caution
2. Open the Ink Cartridge Locking Cover on the right side.Pinch (G) firmly and pull up the cover.
3. Remove the Black FINE Cartridge from its package.
Caution
4. Pull the orange protective tape (H) in the direction of the arrow and remove it gently.
5. Place the Black FINE Cartridge into the right slot .
Caution
6. Push down of the Ink Cartridge Locking Cover until you hear a click to close it completely.
View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle).
7. Insert the Color FINE Cartridge into the left FINE Cartridge Holder in the same way as .
8. Lift the Scanning Unit (Cover) slightly and fold the Scanning Unit Support, then gently close the Scanning Unit (Cover).
Caution