Color Calibration Management Console is software that allows you to view the color calibration status and execute color calibration on multiple printers. You can also acquire color measurement data and execute color checks on printers that have a spectrophotometer unit installed.
Update History
Modifications from Ver.1.10 to Ver.2.00 1. The iPF6400S Series/iPF8400S Series have been supported. 2. Windows8 has been supported. 3. The changes include improvement of operation, and the function regarding printer search and color check schedule settings have been added.
System requirements
The following hardware and software are recommended for this software.
Software: Microsoft Windows 10, English edition Microsoft Windows 8.1, English edition Microsoft Windows 8, English edition Microsoft Windows 7, English edition Microsoft Windows Server 2008, English edition Microsoft Windows Vista, English edition Microsoft Windows Server 2003 R2, English editio Microsoft Windows Server 2003, English edition Microsoft Windows XP, English edition
(Note) - Not available on 64-bit version of Windows. - For the Windows OS, use the latest version of Service Pack.
Recommended operating environment: Any computer running the software listed above
Printers: Canon imagePROGRAF iPF6400 Canon imagePROGRAF iPF6400S Canon imagePROGRAF iPF6410 Canon imagePROGRAF iPF6410S Canon imagePROGRAF iPF6450 Canon imagePROGRAF iPF6460 Canon imagePROGRAF iPF8400 Canon imagePROGRAF iPF8400S Canon imagePROGRAF iPF8410 Canon imagePROGRAF iPF8410S Canon imagePROGRAF iPF9400 Canon imagePROGRAF iPF9400S Canon imagePROGRAF iPF9410 Canon imagePROGRAF iPF9410S (Some printer models are available in the limited countries or areas.)
(Note) - Windows versions other than English Windows cannot be used.
Setup Instructions
- For more about installation the procedure, please refer to the manual.
Caution
- You must log into Windows as an Administrator before the installation.
- before performing the installation, close all the other application software.
- If Cutting Mode in the Paper Menu of the printer control panel is set to User Cut, Cut the Paper before starting color measurement.
File information
File Name : CCMC-Win-200.exe File Type : AP File Size : 31628992KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.
Close
