imagePROGRAF PRO-1000 Support
Drivers & downloads

Printer Firmware Updater (Windows) for the imagePROGRAF PRO-1000 Ver.2.4

Content Id: 0400252101


Description



Outline

This updater will upgrade your printer's firmware to version 2.070.
To perform this upgrade, a USB cable and a computer are needed.
If your printer's firmware version is already 2.070 or later, the update is not necessary.
To check your printer's firmware version, refer to the Update Procedure included in the downloaded file.

Detail

- Printer Update.exe: The firmware to upgrade the functions of the printer.
- HowTo folder: Contains the manual of the firmware update procedures. Launch it from fut_upgrade.html inside the language folder.

Update History

[Ver.2.4]
- Name of the tray at rear side has been changed.

[Ver.2.2]
- Optimization of the specifications of Chroma Optimizer ink used in the auto maintenance.

[Ver.2.1]
The following problem has been rectified.
- Calibration from software is disabled.

[Ver.2.0]
- "Head Replacement" menu is added on the operation panel menu.
- Some small failures are modified.

[Ver.1.1]
ROM:
- The maximum printable height of custom paper size will be lengthened to 25.5-inch (647.70mm) with specifying in the printer driver.

[Ver.1.0]
- Cableless set-up failure on particular printers has been modified.
- Calculating formula of the necessary value for print cost aggregation with Accounting Manager has been revised.

System requirements

Windows 10 (32bit)
Windows 10 (64bit)
Windows 8.1(32bit)
Windows 8.1(64bit)
Windows 8(32bit)
Windows 8(64bit)
Windows 7(32bit)
Windows 7(64bit)
Windows Vista SP2 or later(32bit)
Windows Vista SP2 or later(64bit)

Setup Instructions

Double-click the downloaded exe. file to decompress it. Then, open the newly-created "fuu_-win-pro_1000-2_2-ea7" folder. And open the language’s folder inside "HowTo" folder, then execute the update of the firmware based on the manual "fut_upgrade.html".

Caution

- A USB cable & a computer are needed to perform this upgrade.
- See the attached manual to confirm the update procedures.
- Execute updating in the environment which you log onto as a member of the Administrators group.

File information


File Name : fuu_-win-pro_1000-2_4-ea7.exe
File Type : FA
File Size : 121468120KB