imagePROGRAF Printer Driver Ver.2.66a for Mac OS X v10.6

Content Id: 0100406902

About the driver

Outline

imagePROGRAF Printer Driver is the software that prints from English Mac's application to Canon imagePROGRAF iPF510/iPF605/iPF610/iPF710.

Update History

Modifications from Ver.2.66 to Ver.2.66a
1. Installer has been replaced.
Modifications from Ver.2.16 to Ver.2.66
1. The failures below, which occur when using Mac OS X v10.6, have been fixed.
- When printing data including characters, it is not printed properly.
- Only a part of data is printed, or data is printed in corrupt layout.
Modifications from Ver.1.10 to Ver.2.16: iPF510/iPF610/iPF710
Modifications from Ver.1.20 to Ver.2.16: iPF605
1. MacOSX10.6 SnowLeopard has been supported.
2. 64-bit has been supported. A single driver now supports both 32-bit and 64-bit.
3. A modification has been made so that when installing driver, printer driver ExtraKit is also installed.

System requirements

The following hardware and software are recommended for this printer driver.

Current OS:
Mac OS X v10.6.8


Compatible Printers:
Canon imagePROGRAF iPF510
Canon imagePROGRAF iPF605
Canon imagePROGRAF iPF610
Canon imagePROGRAF iPF710

Setup Instructions

Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded file and mount it on the Disk Image.
3. Double-click the mounted Disk Image.
4. Double-click the packaged file in the folder. Installation starts automatically.

Caution

Note the following limitations when installing.
- After installing this software, install Media Configuration Tool, and run it to add the media information.
- We recommend that you upgrade the firmware of the printer to the latest version.
- If you have upgraded your OS, reinstall the printer driver.

File information

File Name : iPF510605610710720810820-Drv-MacX-266.dmg
File Type : DR
File Size : 109600572KB