The CD-R Tray (supplied) allows the printing of images on printable DVD/CDs.
This section describes how to print scanned photos or images on printable DVD/CDs.
Caution
We recommend that you test print on an unneeded printable DVD/CD first.
Printing on DVD/CDs
Choose either of the method below according to your purpose.
To print from DVD/CD label
You can print the label side of the DVD/CD on a printable DVD/CD by loading it on the Platen Glass.
To print a DVD/CD label from photo data on a memory card
You can print photo data on a memory card on a printable DVD/CD by loading the memory card on the Card Slot.
To print a DVD/CD label from a printed photo
You can print a printed photo on a printable DVD/CD by loading it on the Platen Glass.
To print a DVD/CD label from film
You can print an image on a film (35 mm negative/positive (strip/slide)) on a printable DVD/CD by loading it on the Platen Glass.
To print a DVD/CD label by using the supplied application
CD-LabelPrint is bundled application software that allows you to edit and modify data before printing. Install it on your computer to use it.
Printing from DVD/CD Label
Copy the label of an existing DVD/CD and print it on a printable DVD/CD.
Caution
You cannot print on 8 cm DVD/CDs.
Caution
If printing is misaligned, adjust the printing position.
1. Make sure that the machine is turned on.
2. Select 
DVD/CD label print on the HOME screen, then press the OK button.
3. Select 
From DVD/CD label, then press the OK button.
The print area setting screen is displayed.
4. Use the 
or 
button to select Outer circle or Inner circle and use the 
or 
button to change the print area.
5. Press the OK button.
Caution
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6. Use the or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.
Caution
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the suitable density printing. If not, specify Other DVD/CD.
7. Load the copy source DVD/CD on the Platen Glass, then press the OK button.
Caution
Be sure to load the copy source DVD/CD with its label side down on the center of the Platen Glass. If you load it near the edge of the Platen Glass, part of the image may be cut off.
8. Check the print settings, then press the OK button.
The message for preparation is displayed.
Caution
Press the Black button for black & white copying.
To change print settings, press the Back button repeatedly until the screen for the setting item to change appears, then change the setting.
9. Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
10. Press the Color button.
Caution
If you press the Black button in step 8, black & white copying will start even if you press the Color button.
To cancel copying, press the Stop button.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
Printing from Photo Data
Print an image on a printed photo onto a printable DVD/CD.
Caution
You cannot print on 8 cm DVD/CDs.
Caution
If printing is misaligned, adjust the printing position.
1. Make sure that the machine is turned on.
2. Select 
DVD/CD label print on the HOME screen, then press the OK button.
3. Select 
From photo data, then press the OK button.
4. Confirm the message, then insert the memory card into the Card Slot.
The print area setting screen is displayed.
5. Use the 
or 
button to select Outer circle or Inner circle and use the or button to change the print area.
6. Press the OK button.
Caution
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
7. Use the or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.
Caution
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the suitable density printing. If not, specify Other DVD/CD.
8. Use the 
or 
button to select the photo to print, then press the OK button.
9. Confirm the print image on the DVD/CD, then press the OK button.
10. Check the print settings, then press the OK button.
The message for preparation is displayed.
Caution
To change print settings, press the Back button repeatedly until the screen for the setting item to change appears, then change the setting.
11. Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
12. Press the Color button.
Caution
Printing will not start if you press the Black button.
To cancel copying, press the Stop button.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
Printing from Photo Data
Print an image on a film (35 mm negative/positive (strip/slide)) onto a printable DVD/CD.
Caution
You cannot print on 8 cm DVD/CDs.
Caution
If printing is misaligned, adjust the printing position.
1. Make sure that the machine is turned on.
2. Select 
DVD/CD label print on the HOME screen, then press the OK button.
3. Select 
From film, then press the OK button.
The print area setting screen is displayed.
4. Use the 
or 
button to select Outer circle or Inner circle and use the or button to change the print area.
5. Press the OK button.
Caution
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6. Use the or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.
Caution
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the suitable density printing. If not, specify Other DVD/CD.
7. Select the type of film.
Caution
You can select Color negative film, B&W negative film, Color positive film, or Mount (for slides).
8. Load the film on the Platen Glass.
Press the Color button to scan the film.
Caution
Press the Color button to scan the film.
9. Use the 
or 
button to select the photo to print, then press the OK button.
Caution
If 
appears on the preview screen, the photos may be not scanned properly. Press the Back button, then repeat the procedure from step 8.
10. Confirm the print image on the DVD/CD, then press the OK button.
11. Check the print settings, then press the OK button.
The message for preparation is displayed.
Caution
Press the Black button for black & white copying.
To change print settings, press the Back button repeatedly until the screen for the setting item to change is displayed, then change the setting.
12. Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
13. Press the Color button.
Caution
If you press the Black button in step 11, black & white copying will start even if you press the Color button.
To cancel copying, press the Stop button.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
Printing from Printed Photo
Print an image on a printed photo onto a printable DVD/CD.
Caution
You cannot print on 8 cm DVD/CDs.
Caution
If printing is misaligned, adjust the printing position.
1. Make sure that the machine is turned on.
2. Select 
DVD/CD label print on the HOME screen, then press the OK button.
3. Select 
From printed photo, then press the OK button.
The print area setting screen is displayed.
4. Use the 
or 
button to select Outer circle or Inner circle and use the or button to change the print area.
5. Press the OK button.
Caution
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6. Use the or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.
Caution
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the suitable density printing. If not, specify Other DVD/CD.
7. Load the photos on the Platen Glass.
Press the OK button to scan the photos.
Caution
Do not see the light source directly while scanning is in progress.
8. Use the 
or 
button to select the photo to print, then press the OK button.
Caution
If
appears on the preview screen, the photos may be not scanned properly. Press the Back button, then repeat the procedure from step 7.
9. Confirm the print image on the DVD/CD, then press the OK button.
10. Check the print settings, then press the OK button.
The message for preparation is displayed.
Caution
Press the Black button for black & white copying.
To change print settings, press the Back button repeatedly until the screen for the setting item to change appears, then change the setting.
11. Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
12. Press the Color button.
Caution
If you press the Black button in step 10, black & white copying will start even if you press the Color button.
To cancel copying, press the Stop button.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
Printing with CD-LabelPrint from the Computer
CD-LabelPrint is bundled application software that allows you to edit and modify data before printing. Install it on your computer to use it. For information on how to install this software, refer to your setup manual.
For details on how to print with CD-LabelPrint, refer to its manual.
If you are using Windows, click Start ⋗ All Programs (or Programs in Windows 2000) ⋗ CD-LabelPrint ⋗ Help. If you are using a Macintosh, open Application folder in the location where the MP Drivers were installed ⋗ CD-LabelPrint folder ⋗ Manual folder ⋗ double-click Manual.htm.
Close
