Issue
Caution
Cause and solution
Paper Is Jammed in the Paper Output Slot or the Rear Tray
Remove the paper following the procedure below.
1. Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.
Caution
Be careful not to touch the components inside the machine.
After removing all paper, close the Scanning Unit (Cover), and turn the machine back on.
Cause and solution
2. Reload the paper, and press the OK button on the machine.
If you turned off the machine in step 1, all print jobs in the queue are canceled. Reprint if necessary.
Caution
-⋗ [ Loading Paper ]
Cause and solution
If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center.
Cause and solution
Paper Is Jammed inside the Machine at the Transport Unit
Remove the paper following the procedure below.
1.Detach the Rear Cover.
Cause and solution
2.Pull the paper out slowly.
Caution
Cause and solution
3.Attach the Rear Cover.
Push the left side of the Rear Cover until it is closed completely.
Cause and solution
If you were not able to remove the paper out in step 2:
4.Remove the Cassette.
Cause and solution
5. Pull the paper out slowly.
Cause and solution
6.If any paper is sticking out of the Cassette, remove the paper, align and reload the paper in the Cassette.
Caution
-⋗ [ Loading Paper ]
Cause and solution
7.Insert the Cassette into the machine again, and press the OK button on the machine.
If you turned off the machine in step 2, all print jobs in queue are canceled. Reprint if necessary.
If you cannot remove the paper or if the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center.
Cause and solution
In other cases
Make sure of the following:
Check 1: Are there any foreign objects around the Paper Output Slot?
Check 2: Are there any foreign objects in the Rear Tray?
If there are any foreign objects in the Rear Tray, be sure to turn off the machine, unplug it from the power supply, then remove the foreign object.
Check 3: Is the Rear Cover closed completely?
Check 4: Is the paper curled?