Compatible Remote Controllers and Remote Switches (Still Images/Movies) (EOS 5D Mark IV)

Types of Remote Controllers and Remote Switches

You can connect the Remote Switch RS-80N3, Timer Remote　Controller TC-80N3 (both sold separately), or any EOS accessory　equipped with an N3-type terminal to the camera for shooting.

Remote Controller RC-6	Timer Remote Controller TC-80N3	Remote Switch RS-80N3	Wireless Controller LC-5

Caution

Connecting the Remote Switch

1. Open the terminal cover.

2. Connect the plug as shown in the　illustration.

To disconnect the plug, grasp the silver part and pull.

Remote Control Shooting

With Remote Controller RC-6 (sold separately), you can shoot remotely up to approx. 5 meters/16.4 feet away from the camera (when you are facing the front of the camera). You can either shoot immediately or with a 2-sec. delay.

1. Set the power switch to ⋖ON⋗.

2. Focus the subject.

3. Set the lens focus mode switch to ⋖MF⋗.

You can also shoot with ⋖AF⋗.

4.Press the ⋖DRIVE・AF⋗ button.

5.While looking at the LCD panel or in the viewfinder, turn the Quick Control Dial ⋖⋗ to choose 10-sec. self-timer/remote control shooting [ ] or 2-sec. self-timer/remote control shooting [ ].

6.Point the remote controller toward the camera's remote control sensor and press the transmit button.

The self-timer lamp lights up and the picture is taken.

Remote control sensor

Caution

Caution

Notes for Movie Shooting

When [Enable] is set, you can start or stop movie shooting using Remote Controller RC-6 (sold separately). Set the RC-6’s release mode switch to ⋖2⋗, then press the transmit button. If the switch is set to ⋖⋗ (immediate release), the ⋖ btn function⋗ setting will be applied.

If [ ] or [ ] is set under the ⋖btn function⋗ setting, besides pressing the ⋖⋗ button, you can start or stop the movie shooting by pressing the shutter button completely or by using Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (each sold separately).