Solution
Charging the Battery PackInserting a Memory Card
Setting the Date and Time
Shooting Still Images
Follow the procedures below to get started with your new camera.
Charging the Battery Pack
Install and charge the battery pack in the camera. Be sure to charge the battery pack initially, because the camera is not sold with the battery pack charged.
1. Slide the cover and open it .
2. Holding the battery pack with the terminals facing as shown, press the battery lock in the direction of the arrow and insert the battery pack until the lock clicks shut.
If you insert the battery pack facing the wrong way, it cannot be locked into the correct position. Always confirm that the battery pack is facing the right way and locks when inserted.
3. Lower the cover and hold it down as you slide it, until it clicks into the closed position .
4. With the camera turned off, open the cover . With the smaller plug of the included interface cable in the orientation shown, insert the plug fully into the camera terminal .
5. Insert the larger plug of the interface cable into the included compact power adapter.
6. Charge the battery pack.
CA-DC30: Flip out the plug and plug the compact power adapter into a power outlet .
CA-DC30E: Plug the power cord into the compact power adapter, then plug the other end into a power outlet.
・Battery charging begins, and the USB charge lamp is lit.
・When charging is finished, the lamp is turned off.
・Remove the compact power adapter from the power outlet and the interface cable from the camera.
Caution
Caution
Inserting a Memory Card
Insert a memory card (sold separately).
Caution
Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera. For more information, please refer to Formatting a Memory Card (PowerShot N2).
1. Open the monitor . Slide the cover and open it .
2. Insert the memory card.
Insert the memory card facing as shown until it clicks into the locked position.
Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera.
3. Close the cover.
Lower the cover and hold it down as you slide it, until it clicks into the closed position .
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen is displayed when you turn the camera on. Information you specify this way is recorded in image properties when you shoot, and it is used when you manage images by shooting date or print images showing the date.
1. Press the ⋖Power⋗ button to turn the camera on.
The [Date/Time] screen is displayed.
2. Set the date and time.
Touch the option to configure, and then touch [ ] [ ] to make the following settings.
Set the year, month, date, and time.
Change the format of the display method for the year, month, and date.
Set the daylight saving time (one hour is added to the current time).
After the settings are completed, touch [Next].
3. Specify your home time zone.
Touch [ ] or [ ] to choose your home time zone.
4. Touch [OK] when finished. After a confirmation message, the setting screen is no longer displayed.
Shooting Still Images
1. Set the mode switch to ⋖ ⋗.
2. Touch [ AUTO].
Aim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
2. Compose the shot.
If the zoom ring is turned in the direction of , the subject gets larger. If the zoom ring is turned in the direction of , the subject gets smaller.
3. Focus.
Press the shutter ring lightly, halfway down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus.
4. Shoot.
Press the shutter ring all the way down.
Caution
If you set the mode switch to [ ] in step 1, the camera proposes images from which you can find new expressions and new ideas which can make you realize the joy of photos and movies by simple operations of just shooting (Creative Shot Mode).
This concludes the guide to getting started with your new camera.