imagePROGRAF Printer Driver Ver.2.62a for Mac OS X v10.6

Content Id: 0100164702

About the driver

Outline

imagePROGRAF Printer Driver is the software that prints from English Mac's application to Canon imagePROGRAF iPF5100/iPF6100.

Update History

Modifications from Ver.2.62 to Ver.2.62a
1. Installer has been replaced.

Modifications from Ver.2.13 to Ver.2.62
1. The failures described below, which occur when using Mac OS X v10.6,
have been fixed.
- When printing data including characters, it is not printed properly.
- Only a part of data is printed, or data is printed in corrupt layout.

Modifications from Ver.1.90 to Ver.2.13
1. MacOSX10.6 SnowLeopard has been supported.
2. 64-bit has been supported. A single driver now supports both 32-bit and 64-bit.
3. A modification has been made so that when installing driver, printer driver ExtraKit is also installed.

System requirements

The following hardware and software are recommended for this printer driver.

Current OS:
Mac OS X v10.6.8


Compatible Printers:
Canon imagePROGRAF iPF5100
Canon imagePROGRAF iPF6100

Setup Instructions

Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded file and mount it on the Disk Image.
3. Double-click the mounted Disk Image.
4. Double-click the packaged file in the folder. Installation starts automatically.

Caution

- This printer driver must be installed in the Mac OS in order to output print jobs to the printer.
- After installing this software, install Media Configuration Tool, and run it to add the media information.
- We recommend that you upgrade the firmware of the printer to the latest version.

File information

File Name : iPF510061006200-Drv-MacX-262.dmg
File Type : DR
File Size : 106455846KB