Firmware Update Tool Ver.1.0.1 for Mac OS X 10.7

Content Id: 0400260208

Description

Outline

You can use this program to update the printer firmware version.

System requirements

Use this program with the systems and the operating environments below.

OS:
OS X Lion v10.7.5

Hardware:
Any computer running the software listed above.

Printers:
Canon imagePROGRAF PRO series

Setup Instructions

Procedures for the download and installation
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded file and mount it on the Disk Image.
3. Double-click the mounted Disk Image.
4. Double-click the packaged file in the folder. Installation starts automatically.

Caution

- Requires Administrator access rights.
- Before you start the firmware version update program, close any other applications that are running.
- Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before you execute the version update program.
- Never switch off the target printer while the firmware version update program is running.
- If you are unable to connect to the Internet to get the latest information, perform the following procedure.
1. Access the Canon website from a computer that can connect to the Internet and download the firmware corresponding to your printer.
2. Copy the downloaded firmware to the computer where this program is installed.
3. Run this program, select "Specify the Firmware", and specify the downloaded firmware.
- If the firmware version update fails while writing to the flash ROM, you may not be able to start the printer.

File information

File Name : fut-mac-1_0_1-ea10_3.dmg
File Type : FA
File Size : 1939170KB