When the built-in memory becomes full, will the recording be automatically saved to the memory card, or vice versa (relay recording)? (VIXIA HF G20 / LEGRIA HF G25)

You can activate relay recording so if the memory you are using becomes full while recording movies, the recording will continue automatically on a memory card.

When recording in the built-in memory, you can choose to use only memory card A for relay recording ( ), or use both memory cards ( ). When recording on memory card A, you can use memory card B for relay recording ( ).

Confirm the following information regarding the relay recording settings.

Insert a memory card that contains no video recordings into the card slot of the memory card you want to use for relay recording.

When relay recording from the built-in memory: memory card slot or both memory card slots.

When relay recording from memory card A: memory card slot only.

Caution

You cannot use relay recording from the built-in memory to memory card B. When using a single memory card, be sure to insert it into memory card slot .

During Story Creator mode, relay recording and double slot recording are not available.

1. Set the mode switch to ⋖M⋗ or ⋖CINEMA⋗.

2. Turn on the camcorder.

3. Touch [ ].

4. Touch [ ].

5. Touch [ ].

6. Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, and touch inside the frame on the right.

7. Touch [ ] or [ ].

8. Touch [Relay Recording].

9. Touch [ ] or [ ].

If [ ] was selected in Step 8, then you can only choose [ ].

10. Touch [ ] to close the menu.

Caution