Close
Solution
Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc. when scanning.
1. Place the film on the Platen, then start ScanGear (scanner driver).
Caution
2. Click the Advanced Mode tab and select film for Select Source.
Caution
Settings are not retained when you switch modes.
3. Set Input Settings according to the film or purpose.
4. Click Preview.
Preview images appear in the Preview area. Cropping frames (scan area) are specified automatically according to the film size.
Select the frames to scan.
5. Set Output Settings.
Caution
When the data size exceeds 1.8 GB, select the Enable large image scans checkbox in the Settings (ScanGear) dialog box of IJ Scan Utility. This will enable you to scan images up to 4.0 GB.
6. Adjust the cropping frame, correct image and adjust colors as required.
-⋗ [ Adjusting Image Settings ]
Caution
You can correct each image separately. Select the frame you want to correct.
7. Click Scan.
Scanning starts.
Caution
(Information) to open a dialog box in which you can check the current scan settings (document type, etc.).