Canon LEGRIA HF R706 digital video camera black back angled

LEGRIA HF R706 Support

FAQs & troubleshooting

Dividing Scenes

Content Id: 8202793100

Solution

You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest.

1. Turn on the camcorder.

2. Press [ ] to set the camcorder to Playback mode.

3. Play back the desired scene.

4. Touch the screen to display the playback controls, and then touch [ ] to pause the playback.

5. Open the screen for dividing scenes.

Touch [Edit]

6. Touch [Divide].

7. Bring the scene to a precise point, if necessary.

Playback controls will appear on the screen. Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point.

During playback pause	/	Frame reverse/advance*
During playback	/	Fast playback backward/forward

*When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds.

8. Stop playback momentarily at the position you want to divide.

9. Touch [Divide].

10. Touch [Yes].

The video from the division point to the end of the scene will appear as a new scene in the index screen.

Caution

If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene.

During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut.　

The following scenes cannot be divided:

- Video snapshot scenes and other scenes that are too short (less than 3 seconds) cannot be divided.

- Scenes cannot be divided within 1 second from the beginning or the end of the scene.

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit