Close
This camera can display an [Electronic Level] as a guide to determine whether the camera's LCD monitor is level.
Please use it as a guide for determining whether the camera is level when shooting.
Caution
).
), the [Electronic Level] cannot be displayed.Display the Electronic Level
1. Press the ⋖DISP.⋗ button (
2. Level the camera.
Adjust the camera's tilt on the left and right sides so that the center of the [Electronic Level] turns green.
Caution
) to display the [Shooting] tab (
). In the [Custom Display] options, add a check (
) to either (
) or (
).Calibrating the Electronic Level
If the subject does not appear level even when the camera's tilt has been adjusted so that the center of the [Electronic Level] is green, calibrate the [Electronic Level].
If you use the [Grid Lines] to confirm that the camera is level beforehand, you can calibrate the electronic level more accurately.
Caution
) a few times, and the [Grid Lines] will appear.) to display the [Shooting] tab (). In the [Custom Display] options, add a check () to either () or ().3. Press the ⋖MENU⋗ (
4. The following window appears.
Operate the ⋖directional buttons⋗ left or right to select 
Operate the ⋖directional buttons⋗ up or down to select 
After making a selection, press the ⋖FUNC./SET⋗ (
5. The following window appears.
Check that [Calibrate] is selected, and then press the ⋖FUNC./SET⋗ button (
Caution
If you want to restore the default settings for the [Electronic Level], select [Reset].
If the [Electronic Level] has not been calibrated, it cannot be reset.
6. The following window appears.
Operate the ⋖directional buttons⋗ left or right to select [OK].
After making a selection, press the ⋖FUNC./SET⋗ (
7. The following window appears.
