Solution
When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot with constant flash.
Caution
1. Press the ⋖Power⋗ button on the camera.
2. Press the ⋖Flash⋗ () button or the right ⋖directional button⋗ ([Flash]).
3. The following screen will appear in the LCD screen.
Operate the ⋖directional buttons⋗ to select the [Flash On] (
).
Make sure to select [On].
4. If the following icon is displayed on the monitor*, this completes the setting process.
* The icon display location differs depending on the model being used.
In the following shooting modes, the flash cannot be set to [On].
Models | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
PowerShot ELPH 110 HS / IXUS 125 HS | |||||||||||
PowerShot ELPH 520 HS / IXUS 500 HS | |||||||||||
| |||||||||||
PowerShot A2300 IS PowerShot A1300 PowerShot A810 IS | |||||||||||
PowerShot D20 |