EOS C700 GS PL Firmware Update version 00

19th December 2017
Thank you for using Canon products.


This firmware update (Version 00) incorporates the following enhancements.

  1. Hybrid Log Gamma HDR ITU-R BT.2100 output has been added.
  2. Importation of 3D LUTs(.cube format) created within Blackmagic Design’s DaVinci ResolveTM software is now supported.
  3. Super16mm sized (2K crop) recording mode has been added.
  4. The progressive frame rates below are now supported when using the B4 Mount Adapter MO-4P (sold separately).
  5.     -    59.94Hz: 59.94P, 29.97P, 23.98P
        -    50.00Hz: 50P, 25P
        -    24.00Hz: 24P
  6. New white balance colour temperature settings have been added.
  7. Slow and Fast mode icon will be displayed in red when in use.
  8. Slow and Fast mode frame rate selection have been simplified
  9. Fixes a sound lag issue which may occur when [Scan Reverse Rec] is enabled.

DaVinci Resolve™ is the trademark of Blackmagic Design Pty Ltd.

  • You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 128MB or more for the firmware update.
  • Firmware Version is for updating Cinema EOS C700 GS PL cameras running firmware version – If your camera’s firmware is already version, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
  • For customers who are using the optional OU-700 Remote Operation Unit, the firmware of the camera and the OU-700 Remote Operation Unit have to be the same. After updating the camera firmware, connect the camera with the OU-700 to update the firmware of the OU-700 from the camera's system settings.
  • For further information, please refer to the latest version of the camera’s Instruction Manual that is released with the firmware update.

Preparations for a firmware update:

After the Firmware update has been performed, the camera’s menu settings and Custom Picture settings will be reset. It is recommended that users save their menu and Custom Picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the camera’s user manual titled Saving and Loading Camera Settings.

The downloaded firmware folder contains the firmware (File Name: VMB2.FIM, File Size: 114,892,076 bytes) and a procedure manual for updating the firmware (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Please check the firmware update procedure manual carefully before starting update operations.

The following items are required to perform this firmware update:

  1. A Cinema EOS C700GSPL camera body
  2. A computer (OS: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1 or Mac OS X (10.7-10.13).
  3. A 128 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available)
  4. An SD card reader-writer (commercially available) or an SD card slot on the computer.
  5. Fully charged V-mount battery (commercially available), 14.8 V DC (acceptable range: 12 V to 20 V DC)
  6. Power adapter (commercially available, DC IN 12V terminal): 4-pin XLR plug (female connector), 12 V DC (acceptable range: 11.5 V to 20 V DC), 10 A (acceptable maximum load current)
  7. The firmware (the downloaded file from Canon website. See link below)

Further information:

Firmware Download Link EOS C700 Firmware

Share this page