EOS C300 and EOS C300 PL Firmware Update version 00

11th November 2015
Firmware update 00 incorporates the following;

Thank you for using Canon products.

This firmware update (Version 00) is for EOS C300 without Dual Pixel CMOS Sensor AF Service Upgrade and EOS C300 PL, and is for cameras with firmware Versions 00 or earlier.


* Common to EOS C300 / EOS C300 PL

1. Enables the user to change fan operating mode between “On” and “Automatic”. When it is set to Automatic, the fan turns off during shooting at normal temperature. When the camera temperature rises, the fan starts automatically and lowers the temperature.

* EOS C300 only

2. Enables control of CINE-SERVO lenses using the RC-V100 remote controller

3. Enables peripheral illumination correction for the following lenses:

EF lenses:
- EF16-35mm f/4L IS USM

- EF-S10-18mm f/4-5.6 IS STM

- EF400mm f/4L DO IS II USM

- EF11-24mm f/4L USM

- EF24-105mm f/3.5-5.6 IS STM

- EF100-400mm f/4.5-5.6L IS II USM

- EF-S24mm f/2.8 STM

- CN7×17 KAS S/E1

4. When one of the following EF lenses is attached and power is turned off, the lens automatically retracts to its minimum length:

- EF40mm f/2.8 STM

- EF-S24mm f/2.8 STM

- EF50mm f/1.8 STM

Firmware Version is only for EOS C300 cameras without the Dual Pixel CMOS AF Feature Upgrade. If the EOS C300 camera has had the Dual Pixel CMOS AF Feature Upgrade applied, please download Firmware Version 

Firmware Version is for EOS C300 or EOS C300 PL cameras with Firmware Version or earlier. If your camera’s firmware is already version, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version. 

For further details, please refer to the latest version of the instruction manual for this product, which will be released at the same time as this firmware update.

Download:  EOS C300 Firmware Update version 00
Share this page