Thank you for using Canon products.
Changes:
Firmware Version 1.4.0 incorporates the following fixes and enhancements.
1. Adds support for registering the still thumbnail when a preset memory is registered.
2. Adds support for registering the still thumbnail of the trace start position.
3. Adds function for freeze image during preset moving.
4. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
5. Adds support for setting up to four output destinations for the free-d protocol.
6. Adds the option “other than network settings and management information” as restore items for the backup/restore function.
7. Adds Backup/Restore function for Add-On Applications System settings.
8. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
9. Fixes minor issues.
Update the firmware from the camera's Settings Page.
For details, refer to the camera's User Manual.
<Firmware file>
- crn500-v140.bin
The firmware contains software modules developed by third parties. The details are available in the download: ReadMe-E.txt, ThirdPartySoftware-E.pdf (Third Party Software) and the license conditions are available in the ThirdPartySoftware folder which is inside the LICENSE folder.
Caution:
Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.
Environment:
Windows 10 64bit, Windows 11
macOS 14
Preparations for a firmware update:
1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.
Further information:
• CR-N500 Firmware Download Link