EOS C300 Mark II Firmware Update version 1.1.0.1 00

13th December 2017
Thank you for using Canon products.

Changes:

This firmware update (Version 1.1.0.1 00) incorporates the following enhancements.

1.Support for LCD monitor LM-V1*1, 2 (separately sold) has been added.
2.Peripheral illumination/chromatic aberration correction has been added for the following lenses:
- EF-S 18-55mm f/4-5.6 IS STM
- EF-S 35mm f/2.8 Macro IS STM
-EF 85mm f/1.4L IS USM

*1 The LA-V1 LCD Attachment Unit cannot be used to attach the LM-V1 to the EOS C300 Mark II / EOS C300 Mark II PL cameras. 3rd party mounting options are required to use the monitor on this model camera.
*2 When using the LM-V1 with the separately-sold WFT-E6 or WFT-E8 Wireless File Transmitter and GP-E1 GPS Receiver, please be sure to maintain space between the two accessories.

Notes:
-You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 64MB or more for the firmware update. 
-Firmware version 1.1.0.1.00 is for updating Cinema EOS C300 Mark II cameras running firmware version 1.0.0.1.00 - 1.0.9.1.00. If your camera's firmware is already version 1.1.0.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version. 
-For further information, please refer to the latest version of the camera’s Instruction Manual that is released with the firmware update.

Preparations for a firmware update:
After the firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
Please note that after updating the camera to Firmware Version 1.0.6.1.00, if you wish to continue using CFast (VPG130) cards that were used before the firmware update, you will need to format the CFast cards with the camera. After the firmware update, and before formatting the CFast cards with the camera, make sure to back up the clips saved to the CFast cards.

The downloaded folder contains the firmware (file name: VLB1.FIM / file size: 43,843,616 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.

The following items are required to perform this firmware update:
1.An EOS C300 Mark II or EOS C300 Mark II PL camera
2.A computer (OS requirements: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1, Mac OS X 10.7 - 10.13)
3.SD/SDHC/SDXC memory card with a capacity of 64 MB or more (commercially available)
4.An SD card reader/writer (commercially available) or an SD card slot built into the computer
5.A fully charged battery pack for the camera
6.Compact power adapter bundled with the camera
7.The firmware (the downloaded file from Canon website. See link below)

Further information:

Firmware Download Link EOS C300 Mark II Firmware
Share this page