Colors of AF Frame Change during Shooting

When shooting still images, the colors of the [AF Frame] change as follows. (This is also the same when using the Touch Shutter function to shoot with the PowerShot ELPH 510 HS / IXUS 1100 HS.)

[AF Frame]	What the color represents
(Green)	When the <shutter button> is pressed halfway and the subject is in focus, the color of the [AF Frame] changes to green.
(Yellow)	When the <shutter button> is pressed halfway and the subject is not in focus, the color of the [AF Frame] changes to yellow. In this case, the () icon appears on the lower right of the [AF Frame].
(Blue)	When the camera is tracking the subject while the <shutter button> is pressed halfway, the color of the [AF Frame] changes to blue. (Servo AF)*1 For the shooting modes in which [Servo AF] works, please refer to the following table.
*2 (Orange)	When pressing the <AF Frame Selector> button () to change the position and size of the [AF Frame]. <AF Frame Selector> is activated in the following condition: - When the [AF Frame] is set to [FlexiZone].
(Gray)	When the camera detects a person's face, but recognizes that it is not the main subject, up to two gray [AF Frames] are displayed. (Face Detect) ([Face AiAF] for PowerShot ELPH 310 HS / IXUS 230 HS) For the shooting modes in which [Face Detect] or [Face AiAF] works, please refer to the following table.

Please see the table below to check if your camera supports each shooting mode.

^{... Automatically set to [On]}

^{... When motion is detected, the camera will be set to [On]}

^{... This shooting mode is not available in this model}

Model	Shooting modes in which the function automatically works
	[Servo AF]*3			[Face Detect] ([Face AiAF] for PowerShot S100 / PowerShot ELPH 310 HS / IXUS 230 HS)*4
PowerShot SX40 HS
PowerShot S100
PowerShot SX150 IS
PowerShot ELPH 510 HS / IXUS 1100 HS PowerShot ELPH 310 HS / IXUS 230 HS

^*3 If [Servo AF] is set to [On], the function works even if the shooting mode is other than listed above.
^*4 If [AF Frame] is set to [Face Detect] or [Face AiAF], the function works even if the shooting mode is other than listed above.