Solution
You can shoot continuously at a maximum speed of approximately 0.7 images/second while the ⋖shutter button⋗ is pressed fully and held. (When shooting continuously in [Low Light] () mode, the maximum speed is approximately 2.6 images/second)
Caution
- [AUTO] (), [Easy] (
), [Smart Shutter] (
), [Stitch Assist] (
), [Movie] (
)
1. Press the ⋖Power⋗ button.
2. Press the ⋖FUNC./SET⋗ () button.
3. The following screen appears on the LCD monitor.
Operate the ⋖directional buttons⋗ up or down to select the [Single Shot] ().
Press the ⋖FUNC./SET⋗ () button.
4. The following screen appears on the LCD monitor.
Operate the ⋖directional buttons⋗ up or down to select the [Continuous Shooting] ().
Press the ⋖FUNC./SET⋗ () button.
5. The following screen appears on the LCD monitor.
If the [Continuous Shooting] () icon is displayed on the upper-left part of the screen, the setting is completed.
As long as you hold the ⋖shutter button⋗ down, the camera will shoot successive images.
There are three modes of continuous shooting so that you can select an appropriate one depending on the scene.
Drive Mode | Description | |
---|---|---|
Approx. 0.7 images/sec., max. | The camera shoots continuously with the focus and exposure set when the shutter button is pressed halfway. | |
Approx. 0.5 images/sec., max. | The camera shoots continuously and focuses.The [AF Frame] is set to [Center]. | |
Approx. 0.5 images/sec., max. | The camera shoots continuously with the focus fixed to the position set in manual focus. In ( |
*2 [Continuous Shooting LV] (
Caution
- To set the shooting mode to [Low Light] () , follow the instructions below.
1. Set the ⋖Mode Dial⋗ to [SCN] ().
2. Press the ⋖FUNC./SET⋗ () button.
3. Operate the ⋖directional buttons⋗ up and down to select [Rec. mode]. ( [Smart Shutter] () appears if settings have not been changed before.)
4. Press the ⋖FUNC./SET⋗ () button.
5. Operate the ⋖directional buttons⋗ up and down to select [Low Light] ().
6. Press the ⋖FUNC./SET⋗ () button.