How to set Continuous Shooting (PowerShot ELPH 310 HS / IXUS 230 HS)

You can shoot continuously at a maximum speed of approximately 3.5 images/second while the ⋖shutter button⋗ is pressed fully and held.

Caution

The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program] ().

Cannot be used with the self-timer.

Continuous shooting speed increases in [Low Light] () mode.

Depending on the shooting conditions, the camera settings and the zoom position, the camera may stop shooting momentarily, or the shooting speed may slow down.

As the number of images increases, the shooting speed may slow down.

If the flash fires, the shooting speed may slow down.

In the following shooting modes, you cannot set the [Continuous] ().

- [AUTO] (), [Movie Digest] (), [Smart Shutter] (), [Handheld NightScene] (), [Long Shutter] (), [Stitch Assist] (), [iFrame Movie] (), [Super Slow Motion Movie] ()

The position and shape of the operation buttons, screens displayed, and setting items may differ according to the model you use.

1. Press the ⋖Power⋗ button.

2. Press the ⋖FUNC./SET⋗ () button.

3. The following screen appears on the LCD monitor.

Operate the ⋖directional buttons⋗ up or down to select the [Drive Mode] ().

After the selection is made, press the ⋖FUNC./SET⋗ button ().

4. The following screen appears on the LCD monitor.

Operate the ⋖directional buttons⋗ up or down to select the [Continuous] ().

After the selection is made, press the ⋖FUNC./SET⋗ button ().

5. The following screen appears on the LCD monitor.

If the [Continuous] () icon is displayed on the upper-left part of the screen, the setting is completed.

As long as you hold the ⋖shutter button⋗ down, the camera will shoot successive images.