Pixma MP145 Support

FAQs & troubleshooting

Copying

Content Id: 8200175600

Solution

Making Copies
Fit-to-Page Copying
Changing the Copy Settings

Making Copies

This section describes the basic procedure to make copies.

1. Turn on the machine and load paper.

see[ Loading Paper ]

2. Press the + button repeatedly to select the number of copies (max. 20 copies).

Caution

By pressing the + button repeatedly, F will be displayed. The number of copies will be set as 20.

3. Press the Paper button repeatedly to select the paper size and type.

The Paper Lamp indicates the selected paper size and type.

A4 or Letter Photo Paper/A4 or Letter Plain Paper/4"x6" Photo Paper

Caution

You can switch the size of paper loaded in the Auto Sheet Feeder between A4 and Letter.

4. Load the original document on the Platen Glass.

5. Press the Color button for color copying, or the Black button for black & white copying.

The machine starts copying.

To make high speed copies:

(1) Press and hold down the Color or Black button for longer than 2 seconds. The LED flashes once.

(2) Release the button. The machine starts high speed copying.

Caution

High speed copying is only available when A4 or Letter plain paper is selected as the paper size and type.

High speed copying is suitable for text-only documents. If the quality is not as good as expected, try normal copying.

When you want to make 10 to 19 copies, set the same number for pieces of paper. In this case, the machine will stop copying in an error. Press the Stop/Reset button to release the error.

To cancel copying, press the Stop/Reset button.

Fit-to-Page Copying

This feature enables you to copy images so that they are automatically reduced or enlarged to fit the page size you select.

1. Turn on the machine and load paper in the machine.

See [Loading Paper].

2. Press the + button repeatedly to select the number of copies.

3. Press the Paper button repeatedly to select the paper size and type.

Caution

If you select A4/Letter Photo Paper or 4" x 6" Photo Paper, the machine copies images so that they fill the entire page without borders. Some cropping may occur.

4. Press the Fit to Page button.

The Fit-to-Page Lamp lights. To cancel the Fit-to-Page copying, press the Fit to Page button again.

5. Load the original document on the Platen Glass.

6. Press the Color button for color copying, or the Black button for black & white copying.

The machine starts Fit-to-Page copying.

Changing the Copy Settings

You can switch the default size for paper loaded in the Auto Sheet Feeder between A4 and Letter.

1. Press the Maintenance button repeatedly until d appears.

2. Press the Black button to select A4, or the Color button to select Letter as the default paper size.

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit