Close
Follow this procedure to scan a document to your computer. Make sure that the scanner driver is installed. To check if the driver is installed, see Installing the Software using USB connection.
1. Set Documents
Place the first page on the platen glass if you are not using the ADF.
For documents you can scan, see Document Requirements.
2. Enter the Scan Mode
Press [SCAN].
The SCAN indicator lights up and the machine enters scan standby mode.
3. Set Scan Function
Start MF Toolbox, then select the scan format.
The mark will be displayed above the button you select.
4. Start Scanning
Press [Start].
Caution
If you want to cancel scanning, Press [Stop/Reset] on the operation panel, then click [OK] on the computer screen.