Firmware Version 1.7.1 incorporates the following enhancements and fixes: 1. Enables servo zooming to be remotely controlled from EOS Utility or Camera Connect when Power Zoom Adapter PZ-E2/PZ-E2B is attached to a compatible lens. 2. Enables up to 2 TB to be used on CFexpress cards larger than 2 TB. 3. Fixes an issue that may cause the camera, in rare instances, to stop functioning when using GPS. 4. Fixes an issue that may display Error Code 70 when performing anti-flicker shooting at a shutter speed of 1 second or higher. 5. Enhances security for FTPS (File Transfer Protocol Security) connections. 6. Fixes an issue in which Mobile File Transfer may not function when connecting the camera to an iPhone compatible with USB 3.0 and higher. 7. Fixes an issue that, under specific circumstances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed. 8. Fixes minor issues.
If the camera's firmware is already Version 1.7.1, it is not necessary to update the firmware.
Notes: Users manual in the WEB is updated accordingly. Please download the manual as well as the latest firmware. You can download it from the official WEB site.
Preparations for a firmware update: After the downloaded compressed file (.zip) is extracted, a firmware folder is created.
*Extracting the downloaded file: Right-click the zip file, and then select Extract All to extract the file.
In the folder you downloaded are the firmware (EOSR3171.FIR / file size: 86,887,648 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully review the instructions to confirm your understanding of the firmware update procedures.
(The following is the history of past firmware updates.)
Changes in version 1.6.0: 1. Adds support for RF-S10-18mm F4.5-6.3 IS STM lens. 2. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off. 3. Fixes minor issues.
Changes in version 1.5.1: 1. Adds the ability to register the focus position in the preset functions of the CR-A100 Camera Remote Application. When used with the Robotic Camera System CR-S700R, it helps the user to focus on the intended subject distance when shooting. 2. Adds the ability to erase voice memos added to images and to add voice memos to protected images. 3. Adds the ability to check the time in the viewfinder by pressing the Exposure Compensation/Aperture button while looking through the viewfinder. 4. Adds enhanced security when transferring images via FTPS transfer. 5. Fixes an issue, in which, after touchscreen operation, in rare circumstances, the camera operations cannot be performed, and even if the camera is operated, [BUSY] appears on the screen. 6. Fixes an issue that, in rare instances, may result in the camera may not operating normally and having no viewfinder or screen display depending on the timing of operating the button and viewfinder activation sensor. 7. Fixes minor issues.
Changes in version 1.4.1: 1. Adds support for Speedlite EL-5.* *The automatic light intensity adjustment of the AF-assist beam is not supported. 2. Adds [Register people priority] to the camera menu. Pre-registered people can now be detected and tracked with priority.** ** This feature may not operate if faces are too small to detect, in profile or turned at an angle or partially hidden; for scenes where the subject is moving; or due to certain shooting environments. 3. Adds [Save/load comm. settings on card] to the camera menu. Network settings can now be transferred between cameras of the same model. 4. Adds [Panning Assist] to the camera menu. When a compatible lens is used for panning shots, image stabilization and subject blur correction are applied during the exposure. 5. Improves the Auto White Balance (AWB) setting to reduce the time it takes for the AWB result to be reflected in the camera’s viewfinder's display when looking through the viewfinder. 6. Adds Protect Images During [FTP Transfer] to the camera menu. Images transferred via FTP can now be automatically protected. The user can determine if images have already been transferred via FTP. 7. Fixes an issue in which Error 70 may occur when using the camera with certain EF lenses after having updated the camera firmware to Version 1.4.0. 8. Fixes an issue in which the original tracking performance of Servo AF cannot be attained depending on shooting conditions when performing high-speed continuous shooting using the electronic shutter after having updated the camera firmware to Version 1.4.0. 9. Fixes minor issues.
Items 1-6, and 9 are changes of Version 1.4.0, and items 7 and 8 are additions of Version 1.4.1.
Changes in version 1.3.0: 1. The [User Def.] on [Picture Style] can now be selected in the Cloud Raw image processing settings. 2. Fixes minor issues.
Changes in version 1.2.2: 1. Fixes an issue that, in rare instances, displays an Error Code 70 when the camera is capturing small subjects. 2. Fixes an issue that, in rare instances, may result in image files not being recorded properly when the battery is removed from the camera while the power switch is set to or .
Changes in version 1.2.1: 1. Adds the ability to set "Custom high speed continuous" to the Drive mode. It is possible to shoot from 2 to 50 images continuously at a speed of approximately 30 to 195 fps. 2. Adds the ability to select "FHD 239.76 fps/200.00 fps" in "High frame rate." 3. 1- Adds the ability for in camera "Depth compositing" during "Focus bracketing." 2- Adds Focus bracketing and depth compositing with a flash (Speedlite EL-1). 4. Adds the ability of time-lapse movie recording. Note that the time-lapse movie setting is retained even if the camera enters the Auto Power Off state before starting time-lapse movie recording. 5. Adds the ability of Cloud RAW processing functionality. RAW processing with the latest image processing technology is possible. This is a paid service that requires the purchase of a Canon Imaging App Service Plan, which will be available starting July 25, 2022. 6. Adds the ability to convert multiple HEIF images into multiple JPEG images.. 7. Adds the ability to set [Still Image Crop/Aspect] to [Custom Controls]. The assigned button can be used to switch between crop and aspect ratio. 8. Adds the ability to crop and resize images during transfer to an FTP server. 9. 802.1X authentication/WPA2-Enterprise now supports the PKCS#12 certificate format. 10. Adds an electronic shutter sound to be played when the mechanical shutter or electronic 1st-curtain is set. 11. Enhances the performance of "Movie Digital IS". It stabilizes the image when taking selfies or walking shots using a wide-angle lens. 12. Adds [Auto Power Off Temp.: Standard/High] to the menu for still shooting. 13. Fixes an issue, which displays Error Code 70 on the camera, that may occur, in rare instances, when the [Disp. performance] setting is set to [Smooth]. 14. Fixes minor issues. 15. Fixes an issue, in which, after having updated the camera to firmware Version 1.2.0, when performing the [Factory reset] operation, some shooting settings are not retained.
Changes in version 1.1.1: 1. Adds the ability to use Smart phone link adapter AD-P1. 2. Adds the ability, when using EOS Utility or Browser Remote for remote shooting with two cards inserted, to set the recording method and select the card to be recorded to. 3. Adds the ability to cancel [Subject Tracking] by pressing the Quick Control and then buttons. 4. Adds Ukrainian as an option to the language of "Browser Remote". 5. Improves operation stability during FTP transfer. 6. Fixes an issue that in rare instances, the camera may become inoperable when shooting in the Servo AF setting while operating the button. 7. Fixes an issue, in which the camera cannot be used as an access point if the camera is being used in a region that only support 2.4 GHz bandwidth for Wi-Fi connections.
File information
File Name : eosr3-v171-win.zip File Type : FA File Size : 91973679KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.