XA35/XA30/HF G40, Firmware Version 126.96.36.199 [Windows]
Content Id: 0400253502
Firmware Version 188.8.131.52 incorporates the following enhancement: 1. An 8Mbps bit rate setting has been added to the MP4 format. (Resolution: 1280x720, Frame rate: 59.94P for NTSC recording and 50.00P for PAL recording.)
Firmware Version 184.108.40.206 is for XA35/XA30, HF G40 camcorders with Firmware Version 220.127.116.11. If your camcorder's firmware is already Version 18.104.22.168, it is not necessary to update the firmware. Once the camcorder is updated to the latest version, it cannot be restored to a previous version.
For further information, please refer to the latest version of the unit's Instruction Manual that is released with the firmware update
Preparations for the firmware update: After the Firmware update has been performed, the camcorder's menu settings will be reset. It is recommended that users save their menu settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. After the firmware update, write the saved settings data back to the camcorder. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Menu Settings".
The downloaded folder contains the firmware (file name: VLG1.FIM / file size: 28,445,568 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following things are required to perform this firmware update: 1. A XA35/XA30 or HF G40 camcorder body 2. A computer (OS: Windows) OS Requirements: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1 3. A 64 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available) 4. An SD card reader/writer (commercially available) or an SD card slot built into the computer 5. A fully charged battery pack for the camcorder 6. Compact power adapter bundled with the camcorder 7. The firmware (the downloaded file)
File Name : xa35-v1010-win.zip File Type : FA File Size : 25915010KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.