ICA Driver Ver. 4.0.0 (Mac)

Content Id: 0100658729

About the driver

Outline

This driver is a scanner driver for Canon color image scanners.

Update History

[Ver.4.0.0]
- macOS Sierra (v10.12) has been added as a supported OS.
- OS X El Capitan (v10.11) has been added as a supported OS.
- Change the supported OS.

[Ver.3.3.4]
- OS X Yosemite (v10.10) has been added as a supported OS.

[Ver.3.1.0]
- OS X Mavericks v10.9 has been added as a supported OS.
- Canon error messages are displayed.

[Ver.1.11.0n]
- OS X Mountain Lion (v10.8) has been added as a supported OS.

[Ver.1.11.0m]
- The supported models have been added.

[Ver.1.9.0m]
- The supported models have been added.

[Ver.1.7.1m]
- The internal modules have been updated.

[Ver.1.7.0m]
- New models have been added to the supported models.

[Ver.1.5.0m/1.5.1m]
- New models have been added to the supported models.

[Ver.1.3.0m]
- Newly supports the following models:
MX340 series, MX350 series, and MX870 series

-[MP210/MP220/MX330/MX310/MP190]
The problem that push-scan starts by clicking the button on the machine has been rectified.
(Just like in Mac OS 10.5 or before, only MP Navigator EX launches).

NOTE:
Some models you see here may not be available in your region.

System requirements

macOS Sierra v10.12
OS X El Capitan v10.11
OS X Yosemite v10.10
OS X Mavericks v10.9
OS X Mountain Lion v10.8.5
OS X Lion v10.7.5

Setup Instructions

Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded file and mount it on the Disk Image.
3. Double-click the mounted Disk Image.
4. Double-click the packaged file in the folder. Installation starts automatically.

Caution

1.[OS v10.11, 10.12]
When scanning is executed with the setting of 25dpi/grayscale/Descreen on, the connection with the device is terminated.
If using the ICA driver,please do not scan with this settings.

2.[OS v10.11, 10.12]
Scanning cannot be performed in the other user environment by switching users. The error message is displayed.
Please reconnect the computer with the printer, and scanning can be performed.

3.[OS X v10.7, v10.8, v10.9, v10.10]
If scanning cannot be performed from the scanner button or from the printer operation panel, install the ICA driver.

4.[OS v10.11]
(USB)Launch IJ Scan Utility in advance before scanning from the product (Push-scan).

5.[OS v10.12]
(USB)Due to a change in the OS specifications, scanning from the product (by using the SCAN button) is not available. Perform scanning from a PC.

6.[OS v10.12]
Phenomenon:
When an error occurs while scanning from ImageCapture, the Scan button is grayed out and cannot be pushed.
Solution:
Restart ImageCapture.

7.[OS v10.12]
Phenomenon:
When a printer is used in a network connection, after switching users, as the scanner does not appear on ImageCapture, scanning may not be performed.
Solution:
Re-establish the network connection.

8.[OS v10.12]
Phenomenon:
When performing scanning from ADF at resolution of 600 dpi, scanning for a reflection copy is performed.
Solution:
Perform scanning with a resolution setting other than 600dpi.

9.When scanning with a Simple mode of Image Capture, the message that an error has been reported from the scanner may be displayed. Use Advanced Mode to perm scanning.

File information

File Name : misd-mac-ijscanner1-4_0_0-ea19_2.dmg
File Type : DR
File Size : 7450263KB