Canon RAW Plugin 2.7.0 for Final Cut Pro

Content Id: 0200712202

About the driver

Outline

Canon RAW Plugin for Final Cut Pro is plugin software for importing and editing Canon RAW(CRM) clips with Final Cut Pro, which runs on macOS systems made by Apple Inc.

Update History

Changes for Canon RAW Plugin 2.7.0 for Final Cut Pro :
- Supports EOS R1.
- Supports EOS C80.
- Supports EOS C400.
- Supports EOS R5 Mark II.

Changes for Canon RAW Plugin 2.6 for Final Cut Pro :
- Supports Firmware Version 1.0.3.1 or later for the EOS C70.

System requirements

To use this software, your computer has to meet the following system requirements.
* Operation is not guaranteed on all computer that satisfy this environment.

1. Installation Requirements
The following software must be installed on the Mac
- Apple Final Cut Pro 10.4.9 or later
2. Supported OSes
- Same as the support conditions of Apple Final Cut Pro
3. Compatible PCs
- Same as the support conditions of Apple Final Cut Pro
CPU;
- Same as the support conditions of Apple Final Cut Pro
GPU;
- Required operating environment
-- Mac equipped with a GPU (or a built-in GPU) of VRAM 1GB or higher that supports Metal
* The following environment is required to be able to handle 5.5K RAW(CRM), 5.9K RAW(CRM) clips.
-- Mac equipped with a GPU (or a built-in GPU) of VRAM 2GB or higher that supports Metal (except for NVIDIA GPU)
* The following environment is required to be able to handle 8K RAW(CRM) clips.
-- Mac equipped with a GPU (or a built-in GPU) of VRAM 4GB or higher that supports Metal (except for NVIDIA GPU)
- Recommended operating environment
-- iMac Pro equipped with AMD Radeon Pro Vega 64
RAM;
- Same as the support conditions of Apple Final Cut Pro
4. Display
- Same as the support conditions of Apple Final Cut Pro
5. Supported Models
EOS R1, EOS C80, EOS C400, EOS R5 Mark II, EOS C70 (Firmware Ver.1.0.3.1 or later), EOS C500 Mark II, EOS C300 Mark III, EOS C200, EOS C200B, EOS R5 C, EOS-1D X Mark III, EOS R3, EOS R5

Setup Instructions

Please refer to the instructions below on how to download and install the software.
Exit all other applications when installing this software.

1. Check that the Apple Final Cut Pro 10.4.9 or later is installed.
2. Download "rpfm-2-7-0-8-9l.dmg.gz" from the download page.
3. Extract "rpfm-2-7-0-8-9l.dmg.gz" on the computer to generate "rpfm-2-7-0-8-9l.dmg".
4. Double-click "rpfm-2-7-0-8-9l.dmg", and double-click the "RPFMInstaller" file in the automatically-mounted disc image "rpfm27".
5. Follow the on-screen instructions to complete the installation.

Caution

Clips in formats other than RAW(CRM) are not supported.

File information

File Name : rpfm-2-7-0-8-9l.dmg.gz
File Type : AP
File Size : 15325466KB