Canon Group
Close Close
Menu Menu Close Close Search
Product image of Canon EOS C400 cinema camera
EOS C400 Support
Drivers & downloads

Remote Camera Control Application for Windows Ver. 1.6.0

For Windows 11, Windows 10 x64 Updated 18 Sep 2024

Content Id: 0200710205


About the driver



Outline

This software is used for remote operation of the camera while viewing the image.

Detail

Version 1.6.0 incorporates the following enhancements:
1.Adds support for operation and setting of the Auto Tracking Application RA-AT001.
- Adds [View] button to display crop frame on the [Crop] of Add-on tab.
- Enables the ability to perform automatic tracking silhouette operations while displaying a cropping frame.
2.Adds support for operation and setting of the Auto Loop Application RA-AL001.
3.Enables the ability to display the power status, recording status (recording mode), and audio level indicator to the video display area.
4.Adds buttons for [AF Lock], [Rec Command] and [Assignable Button Setting] to the camera’s operation area.
5.Adds the following new functions while operating EOS C400.
- Enables the ability to confirm the effective area of AF on the video display area.
- Adds [Base ISO] button to the camera’s operation area.
- Adds [People AF] and [Animal AF] button to the camera’s operation area.

Installation Instructions
Refer to the instructions for installing the Remote Camera Control application.


- RemoteCameraControlApplicationSetup.exe


CR-N700/ CR-N500/ CR-N300/ CR-N100/ CR-X300
XF605
EOS C300MkIII/ EOS C500MkII/ EOS C70/ EOS C400/EOS C80

The application contains software modules developed by third parties. The details are available in the download: Readme-E.txt. The Third-party Software License (ThirdPartySoftware-E.pdf) and the license conditions are available in the OpenSource Folder which is inside the LICENSE folder.

Update History

Version 1.5.0
- Adds preset thumbnail view.
- Adds trace thumbnail view.
- Adds function to display still image while moving to preset position.

Ver. 1.4.0
- Adds the ability to move crop frame, resize crop frame, and select crop image destination (CR-N700 only).
- Adds [Save Image Quality Settings] Button.
- Adds the ability to change on/off of zoom-linked pan & tilt speed control per each camera.
- Adds [Preset Speed Mode] for playback at the speed of preset registration.

Ver. 1.3.0
- The functions of this software have been extended to support XF605.
- The focus guide can now be displayed at the clicked position.
- Supports eye detection AF. When this function is turned on, the camera detects the eye of the main subject and automatically focuses on the subject, tracking the subject even if it moves.
- Face detection AE is now supported. The camera detects the face of the main subject and adjusts the brightness automatically when the function is turned on.
- It is now possible to start and stop video recording.
- You can now select the output destination of the camera menu and operate the menu.
- It is now possible to display shooting information such as camera shooting parameters, output resolution and frame rate, and custom pictures.
- You can now assign any operation to any key on the joystick.
- You can now select a custom picture stored in the camera.
- The assign buttons (1-4) registered in the camera are now available.

Ver. 1.2.0
- Adds the ability to register and delete presets.
- Adds the ability to click to focus on desired area.
- Targets detected by the face detection and tracking functions are now highlighted with a square frame.
- Adds the ability to select the tracking target when multiple faces are detected by the face detection and tracking functions.
- Adds a [Details] tab to the camera’s operation area, and image quality settings such as [Sharpness] and [Black Gamma] can now be set.
- Adds support for wiper control, enhanced ND filter control, and infrared shooting control.

Ver. 1.1.0
- Adds the ability to specify desired [Time] or [Speed Level] for Pan/Tilt/Zoom operations when selecting a preset.
- Adds the ability to stop a preset operation by the [Stop] button.

System requirements

OS : Windows 11, Windows 10 64-bit
CPU : Intel Core i7-8700 or greater
Memory : 8 GB or more
Display : Resolution 1920×1080 or greater

Setup Instructions

1. Download the file to any folder.
2. Right-click the zip file, and then select Extract All to extract the file.

Caution

- Read the Readme file or the User Guide for this software before using. Important notes and restrictions regarding this software are contained therein.
- Update the camera to the latest firmware.

File information


File Name : rccainstall-v160.zip
File Type : AP
File Size : 106278039KB