Solution
Step 1: Connecting the Camera to a Printer via Wi-FiStep 2: Printing Images
Additional Information: Using the Virtual Keyboard
Connect the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi to print images.
This section describes how to connect the camera directly to a printer via Wi-Fi.
Caution
Step 1: Connecting the Camera to a Printer via Wi-Fi
1. Turn on the camera and the printer.
2. Press the camera’s ⋖ ⋗ button.
3. Select [Wi-Fi settings].
4. Select [Wi-Fi].
5. Select [Enable].
6. When the following screen appears, press ⋖ ⋗.
7. Enter the nickname. You can enter any characters between 1 to 8 characters in length.
When you finish entering, press the ⋖MENU⋗ button.
*For more information on using the keyboard, please refer to "Using the Virtual Keyboard".
Caution
Before setting up a connection, set the camera’s nickname (for identification).
When the camera is connected to another device via a wireless LAN, the nickname will be displayed on the device. Be sure to set a nickname as otherwise you cannot go to the wireless LAN settings screen.
8. When the following screen appears, select [OK], then press ⋖ ⋗.
To return to the screen that appears when the ⋖ ⋗ button is pressed, press the ⋖MENU⋗ button.
9. Select [Wi-Fi function].
10. Select [ ] (Print from Wi-Fi printer).
11. Select [Register a device for connection].
12. Check the SSID and password.
Caution
"_Canon0A" is displayed at the end of the SSID.
13. Operate the printer to connect it to the camera via Wi-Fi.
14. When a list of detected printers appears, select the printer to connect to via Wi-Fi, then press ⋖ ⋗.
The processing screen is displayed.
When a Wi-Fi connection is established, an image on the card will appear.
The settings for connecting to a printer are now complete.
Step 2: Printing Images
1. Press the ⋖ ⋗ ⋖
⋗ keys of the cross keys to select an image to print, then press ⋖
⋗.
By pressing the ⋖ ⋗ button, you can switch to the index display and select an image.
2. Select [Print image].
3. Select [Print].
4. Press the ⋖ ⋗ button to display the confirmation dialog. Select [OK], then press ⋖
⋗ to terminate the connection.
Caution
Caution
- You changed the print order or deleted any of the print ordered images before resuming printing.
- When index is set, you changed the paper setting before resuming printing.
- The card’s remaining capacity was low when you paused printing.
Additional Information: Using the Virtual Keyboard
The following section describes how to set the camera’s nickname using the virtual keyboard.
The nickname can be changed later from the [Wireless communication settings] screen.
Changing the entry area | Press the < |
Moving the cursor | Press the < |
Entering text | In the bottom area, press the < You can check how many characters you have entered and how many more can be entered by referring to [*/*] on the upper right of the screen. |
Changing the entry mode* | Select [ * When [Touch control: Disable] is set, you can enter all characters on one screen. |
Deleting a character | Press the < |
Finishing the text entry | Press the < MENU > button to confirm what you have entered and exit. If a confirmation dialog is displayed, select [OK] to exit. |
Canceling the text entry | Press the < INFO > button to cancel text entry and exit. If a confirmation dialog is displayed, select [OK] to exit. |