Canon Digital Cinema Camera EOS C500 Mark II Firmware Version 22.214.171.124 [Windows]
Content Id: 0400592302
Firmware Version 126.96.36.199 incorporates the following fix and enhancements:
1. Compatible with EF Cinema Lens CN 10 x 25 IAS S/E1. - Peripheral illumination / chromatic aberration correction has been added. - Enable autofocus with Dual Pixel CMOS AF. - Added support for "Dual Pixel Focus Guide" feature. 2. The ability to record XF-AVC Proxy has been added during XF-AVC recording. 3. The XF-AVC Long GOP bit rate recording mode has been added. 4. The ability to update the SDI/HDMI output from 59.94P to 29.97P (or 23.98P) has been added. 5. The ability to select "5 sec. Pre REC function" in XF-AVC recording mode has been added. 6. Improved the card file name when simultaneously recording XF-AVC or Cinema RAW Light. 7. "B&W during Magn. " menu has been added when Magnification is enabled. 8. The default value of the assign button has been changed from "Magnification: Video terminal" to "Magnification".
Caution: - Firmware version 188.8.131.52 is for updating EOS C500 Mark II cameras running firmware version 184.108.40.206 - 220.127.116.11. If your camera's firmware is already version 18.104.22.168, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version. - Please refrain from loading menu settings generated using the most recent firmware version to a product running an old firmware version, as doing so may affect camera operations.
Preparations for a firmware update: - Please use a commercially available SD / SDHC / SDXC memory card that is 512MB or more for the firmware update. - After the firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings". - The downloaded folder contains the firmware (file name: VPC3.FIR / file size: 76,848,000byte), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
System requirements The following items are required to perform this firmware update: 1. Camera Body EOS C500 Mark II 2. A computer (OS requirements: Windows 10, Windows 8.1, Windows 8) 3. SD/SDHC/SDXC memory card with a capacity of 512MB or more (commercially available) 4. An SD card reader/writer (commercially available) or an SD card slot built into the computer 5. A fully charged battery pack for the camera 6. Power adapter (commercially available, DC IN 12V terminal): 4-pin XLR plug (female connector), 12 V DC (acceptable range: 11.5 V to 20 V DC), 10 A (acceptable maximum load current) 7. The firmware (the downloaded file)
History: Firmware Version 22.214.171.124 incorporates the following fix: 1. Remote A terminal and Remote B terminal can be used simultaneously. 2. Sensor mode information can be displayed. 3. Fixes a phenomenon in which, under specific conditions, high-brightness areas may appear tinted. 4. Fixes a phenomenon where the [C. Temp. Increment] setting cannot be changed. 5. Fixes a phenomenon where the SSID (stealth) setting cannot be made in a Wi-Fi connection. 6. Fixes the metadata to be recognized color profile correctly in some editing software.
File Name : c500mkII-v1021-win.zip File Type : FA File Size : 78889336KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.