If the maximum burst is lower than the normal number, and the camera stops continuous shooting in mid-course, check the [High ISO speed noise reduction] custom function setting.
If [High ISO speed noise reduction] is set to [On] or [Strong], the number of continuous shots (maximum burst) will be lower. To reset the maximum burst to normal, select either [Standard], [Low], or [Disable] for [High ISO speed noise reduction].
Caution
When the [High ISO speed noise reduction] setting is enabled, more time is required to process noise reduction. As a result, it will take longer to temporarily save data in the storage space, and the camera is more likely to be interrupted during continuous shooting.
For information about the effect of using [High ISO speed noise reduction] on the maximum burst for the model you are using, please check the table below.
Also, for details on how to change the custom settings, please see the instruction manual supplied with the camera.
Digital Single-Lens Reflex Camera
Model Name | [High ISO speed noise reduction] Custom Functions | Has Effect on Maximum Burst? |
EOS-1D X | No (*2) | |
EOS-1Ds Mark III | C.Fn II-2 | Yes |
EOS-1Ds Mark II | No such function | - |
EOS-1Ds | No such function | - |
EOS-1D Mark IV | C.Fn II-2 | Yes (*1) |
EOS-1D Mark III | C.Fn II-2 | Yes |
EOS-1D Mark II N | No such function | - |
EOS-1D Mark II | No such function | - |
EOS-1D | No such function | - |
EOS 5D Mark III | No (*2) | |
EOS 5D Mark II | C.Fn II-2 | Yes (*1) |
EOS 5D | No such function | - |
EOS 6D | Yes (*2 *4) | |
EOS 7D Mark II | Yes (*2*5) | |
EOS 7D | C.Fn II-2 | Yes (*1) |
EOS 70D | Yes (*2 *4) | |
EOS 60Da | C.Fn II-2 | Yes (*1) |
EOS 60D | C.Fn II-2 | Yes (*1) |
EOS 50D | C.Fn II-2 | Yes (*1) |
EOS 40D | C.Fn II-2 | Yes |
EOS 30D | No such function | - |
EOS 20Da | No such function | - |
EOS 20D | No such function | - |
EOS 10D | No such function | - |
EOS REBEL T5i / EOS 700D | Yes (*3) | |
EOS REBEL T4i / EOS 650D | Yes (*3) | |
EOS REBEL SL1 / EOS 100D | Yes (*3) | |
EOS REBEL T3i / EOS 600D | C.Fn II C.Fn-5 | Yes (*1) |
EOS REBEL T2i / EOS 550D | C.Fn II C.Fn-5 | Yes (*1) |
EOS REBEL T1i / EOS 500D | C.Fn II C.Fn-5 | Yes |
EOS DIGITAL REBEL XSi / EOS 450D | C.Fn II C.Fn-4 | Yes |
EOS REBEL T5/EOS 1200D | C.Fn II C.Fn-5 | Yes (*1) |
EOS DIGITAL REBEL T3 / EOS 1100D | C.Fn II C.Fn-4 | Yes (*1) |
EOS DIGITAL REBEL XS / EOS 1000D | C.Fn II C.Fn-4 | Yes |
EOS DIGITAL REBEL XTi / EOS 400D DIGITAL | No such function | - |
EOS DIGITAL REBEL XT / EOS 350D DIGITAL | No such function | - |
EOS DIGITAL REBEL / EOS 300D DIGITAL | No such function | - |
EOS D30 | No such function | - |
EOS D60 | No such function | - |
*1: With setting [2:Strong], the maximum burst for continuous shooting will greatly decrease. If either [0:Standard], [1:Low], or [3:Disable] is selected, the maximum burst will rarely decrease.
*2: Whether set to [0: Standard], [1: Low], [2: High], or [3: Disable], there is no effect on the maximum burst.
*3: With [High] or [Multi Shot Noise Reduction], the maximum burst for continuous shooting will greatly decrease. If either [Disable], [Low], or [Standard] is selected, the maximum burst will rarely decrease.
*4: When [Multi Shot Noise Reduction] is set, four shots will be taken continuously, then shooting will stop.
*5: When [Multi Shot Noise Reduction] is set, four shots will be taken continuously, then shooting will stop. If the image-recording quality is set to RAW or RAW+JPEG, you cannot set [Multi Shot Noise Reduction].
Interchangeable-Lens Compact System Camera
Model Name | [High ISO speed noise reduction] Custom Functions | Has Effect on Maximum Burst? |
EOS M2 | Yes (*1) | |
EOS M | Yes (*2) |
*1: With setting [High], the maximum burst for continuous shooting will greatly decrease. If either [Disable], [Low], or [Standard] is selected, the maximum burst will rarely decrease.
*2: With [High] or [Multi Shot Noise Reduction], the maximum burst for continuous shooting will greatly decrease. If either [Disable], [Low], or [Standard] is selected, the maximum burst will rarely decrease.