Addressed a vulnerability (KRACK) in WPA (Wi-Fi Protected Access)/WPA2 (Wi-Fi Protected Access II) for devices that support a wireless LAN connection (Wi-Fi). You will be asked to enter the product serial number before downloading the firmware. The serial number is the sequence of 10 alphanumeric characters printed on a label on the back of the device.
This firmware includes the following corrections and improvements: V05.01 1. Addressed a vulnerability (KRACK) in WPA (Wi-Fi Protected Access)/WPA2 (Wi-Fi Protected Access II) for devices that support a wireless LAN connection (Wi-Fi). 2. Resolved other minor issues.
The firmware and instruction files have been compressed. The following instructions show you how to download the compressed files and decompress them.
1. To download files, click the file link, enter the printer serial number, then select [Save] and specify the directory where you want to save the file. The download will start automatically. 2. Files are saved on your computer desktop. 3. Double-click the file to mount the Disk Image. 4. Double-click the mounted Disk Image. 5. Double-click the Installer file in the folder. Installation starts automatically. 6. Open the decompressed PDF file. Follow this PDF instruction to start the firmware update.
*Please note the following restrictions when using this software. - When updating the firmware version, be sure to wait until print operations are complete before beginning the update operation. When the Job indicator on the operation panel is on or blinking, the device is processing operations. Wait until the Job indicator turns off after the operations are complete. - If the Message indicator is on, refer to the e-Manual and resolve the issue, and then perform the update operation after making sure that the Error indicator is off. - If the update operation is performed while the device is processing other operations, or while images are stored in memory, those other operations will be canceled and the images stored in memory will be lost. - If print jobs are sent to the device from another computer or application while the firmware update is in progress, a critical error may occur. - Do not turn off the device power, or disconnect any USB or LAN cables while the firmware update is in progress. - If your computer enters sleep mode, the firmware update may not be performed properly.
*To prevent errors: - To prevent problems resulting from operations performed on other computers during the firmware update, performing the update using a USB connection is recommended. - Configure your computer settings so that it will not enter sleep mode before performing the firmware update. - If the device is connected via USB cable, disconnect the LAN cable. - If using a USB connection, do not connect the device through a USB hub as doing so may result in connection errors. - If the device is connected via LAN cable, disconnect the USB cable. - Do not print, etc. while the firmware is being updated. - If a critical error occurs (the device will not start after turning on the power, etc.), repairs will be required.
File Name : mac-lbp253-fw-v0501.dmg File Type : FA File Size : 70043245KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.