EOS-1D X Mark III Firmware Update, Version 1.5.0 [Windows]
Content Id: 0400681602
Firmware Version 1.5.0 incorporates the following enhancements and fix: 1. Adds [Canon Log 3] to [Canon Log settings]. • Support for RAW movies shot with Canon Log 3 and RAW (Light) will be available in a future version of Cinema RAW Development and in Digital Photo Professional software. • Support for the processing of RAW movies shot with Canon Log 3 and the application of Viewing LUT will be available in a future version of Digital Photo Professional software. 2. Simultaneous movie recording on card 1 and card 2 has been added, however RAW movies and RAW(Light) movies cannot be recorded simultaneously on card 1 and card 2. 3. Support for the VPG 400(Video Performance Guarantee Profile), a standard based on the CFexpress 2.0 specification, has been added. 4. Fixes an issue in which there are rare instances where the shooting settings for Still Photo mode are retained when a user switches to Movie mode.
Firmware Version 1.5.0 is for cameras with firmware up to Version 1.4.0. If the camera's firmware is already Version 1.5.0, it is not necessary to update the firmware.
Q&A: Preparations for a firmware update: After the downloaded compressed file (.zip) is extracted, a firmware folder is created.
*Extracting the downloaded file: Right-click the zip file, and then select Extract All to extract the file.
In the folder you downloaded are the firmware ( 1DX30150.FIR / file size: 81,890,256 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please be sure to check the procedure in accordance with the instruction.
(The following is the history of past firmware updates.) Changes in version 1.4.0: 1. Adds [RAW (Light)] to the movie recording size and [IPB (Light)] to 4K to enable lower bit rate shooting. These settings can also be selected when RAW+MP4 is set. 2. The transfer time (estimated value) now displays on the camera monitor during FTP transfer. 3. Improves communication reliability when using FTP and USB simultaneously.
Changes in version 1.3.0: 1. Enables 2nd curtain shooting sync during radio transmission wireless flash shooting when the Speedlite EL-1 flash is attached to the camera. 2. Enables manual flash output (excluding high-speed sync and optical transmission wireless flash shooting) to be selected and set up to 1/8192 from the camera menu screen when the Speedlite EL-1 flash is attached to the camera. 3. Improves compatibility of HEIF images recorded in the camera with MIAF (Multi-Image Application Format) standards. 4. Fixes the phenomenon that may result in the occurrence of time-out under certain conditions during FTP transfer.
Changes in version 1.2.1: 1. Fixes a phenomenon, in which, after updating the camera’s firmware to version 1.2.0, the Smart Controller may respond slowly or not at all on some cameras. *) *) The phenomenon described above may occur in cameras whose first two digits of the serial number are "01" "02" "03" or "04".
Changes in version 1.2.0: 1. Enhancements when using Browser Remote: - The image list displayed will be refreshed automatically on the browser. - On the shooting screen of the browser, you can set the movie resolution and a high frame rate. - On the shooting screen of the browser, you can change the movie shooting mode. - On the shooting screen of the browser, Live View will be displayed as soon as you select the movie shooting button. 2. Enhances Auto Focus (AF) for improved face and eye recognition at greater distances. 3. Fixes a phenomenon that may occur during viewfinder shooting, in which the shutter may not be released or the camera may not operate in the following settings: - In One-Shot AF mode, when the AF Area Selection Mode is set as Zone AF, Large Zone AF or Automatic Selection AF. - In AI Servo AF, when direct AF point selection is made using the smart controller. - When the Register/Recall Shooting Function is assigned to the AE Lock button, in the Custom Controls. 4. Connectivity during FTP transmission, has been improved. 5. Improves Wi-Fi connectivity when using the Wireless File Transmitter WFT-E9. 6. Fixes a phenomenon, in which the card access time may take longer, when using certain CFexpress cards.
Changes in version 1.1.0: 1. The option to capture full HD movies and 4K UHD movies in 23.98p frame rate has been added. 2. The communication speed has been improved when connected via wired LAN. 3. The "Browser Remote" function has been added. 4. The function to transfer only protected images has been added. 5. Corrects the phenomenon in which, when the electronic level is set to "Show" in the viewfinder display, in rare cases, the camera may freeze when operating the AF-ON button or shutter button. 6. Corrects the phenomenon in which the Custom Shooting Mode settings may change when the shooting mode is switched.
File Name : eos1dx3-v150-win.zip File Type : FA File Size : 86974557KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.