How to import images to Digital Photo Professional Express (Wi-Fi Connection) (EOS-1D X Mark III)

When the camera and iPad are connected via Wi-Fi, the images on the camera can be imported to the iPad and displayed in Photo Professional Express. The two ways to import images are as follows.

Caution

Caution

Procedures starting with an illustration, are steps for the iPad. procedures starting with a illustration, are steps for the camera.

Keep your fingers or other objects off the Wi-Fi antenna area. Covering this may decrease the speed of your image transfers.

Depending on the condition of the network you are using, it may take a longer time to transfer images.

A memory card must be in the camera for the connection.

Using Digital Photo Professional Express to import images in JPEG and RAW(CR3)

1. Install Camera Connect.

2. Open [ Settings ] on iPad, make sure the [ Airplane Mode ] is [ OFF ].

3. Turn the camera on.

4. Press the ⋖ ⋗ button.

5. Press the ⋖ ⋗ button to choose the [ ] tab.

6. Turn the ⋖ ⋗ dial to choose [ Network settings ], press ⋖ ⋗.

7. Turn the ⋖ ⋗ dial to choose[ Network ], press ⋖ ⋗.

8. Turn the ⋖ ⋗ dial to choose[ Enable ], press ⋖ ⋗.

9. Turn the ⋖ ⋗ dial to choose [ Connection settings ], press ⋖ ⋗.

10. Turn the ⋖ ⋗ dial to choose[ SET* Unspecified ], press ⋖ ⋗.

11. Turn the ⋖ ⋗ dial to choose [ Create with wizard ], press ⋖ ⋗.

12. Turn the ⋖ ⋗ dial to choose [ Configure online ], Choose [ OK ] and press ⋖ ⋗.

13. Turn the ⋖ ⋗ dial to choose [ Smartphone ], Choose [ OK ] and press ⋖ ⋗.

14.Choose [ OK ] and press ⋖ ⋗.

15. Turn the ⋖ ⋗ dial to choose [ New settings ], Choose [ OK ] and press ⋖ ⋗.

16. Turn the ⋖ ⋗ dial to choose [ Camera access point mode ], press ⋖ ⋗.

17. Turn the ⋖ ⋗ dial to choose [ Easy connection ], Choose [ OK ] and press ⋖ ⋗.

18. Choose [ OK ] and press ⋖ ⋗.

19. Choose [ OK ] and press ⋖ ⋗.

20. Turn the ⋖ ⋗ dial to choose [ New settings ], Choose [ OK ] and press ⋖ ⋗.

21. The SSID ( ) and password ( ) will be displayed on the screen.

22. Open [ Settings ] on the iPad, select [ Wi-Fi ] to confirm the SSID is the same as the one displayed on the camera screen, and tap to select.

23. Input the same Password as displayed on the camera ( ) and tap [ Join ] ( ).

24. Open Digital Photo Professional Express.

25. Tap [Import from Canon Camera Connect (RAW/JPEG)] from [ ] on the upper left hand.

Caution

26. Tap [ OK ].

27. Tap the camera to connect.

28. Confirm that [ Operate the camera to establish a connection ] is displayed.

29. Choose [ OK ] and press ⋖ ⋗.

30. Choose [ OK ] and press ⋖ ⋗.

31. Tap [ Images on camera ].

32. Tap [ Select ].

33. Tap on the imported images to select images.

Selected images will have a displayed ().

Tap on [ ] to select all.

After selecting, tap on ().

34. Select image size, and tap　[ OK ].

35. The selected images will be imported into Digital Photo Professional Express.

36. Once the images have been imported, tap [ Open linked app ].

37. Tap [ Yes ].

38. Digital Photo Professional Express will open, tap [ OK ].

39. The imported images will be displayed in the thumbnails screen in Digital Photo Professional Express.

Using Camera Connect to import images in JPEG or RAW (CR3)

1. Install Camera Connect.

2. Open [ Settings ] on iPad, make sure the [ Airplane Mode ] is [ OFF ].

3. Turn the camera on.

4. Press the ⋖ ⋗ button.

5. Press the ⋖ ⋗ button to choose the [ ] tab.

6. Turn the ⋖ ⋗ dial to choose [ Network settings ], press ⋖ ⋗.

7. Turn the ⋖ ⋗ dial to choose[ Network ], press ⋖ ⋗.

8. Turn the ⋖ ⋗ dial to choose[ Enable ], press ⋖ ⋗.

9. Turn the ⋖ ⋗ dial to choose [ Connection settings ], press ⋖ ⋗.

10. Turn the ⋖ ⋗ dial to choose[ SET* Unspecified ], press ⋖ ⋗.

11. Turn the ⋖ ⋗ dial to choose [ Create with wizard ], press ⋖ ⋗.

12. Turn the ⋖ ⋗ dial to choose [ Configure online ], Choose [ OK ] and press ⋖ ⋗.

13. Turn the ⋖ ⋗ dial to choose [ Smartphone ], Choose [ OK ] and press ⋖ ⋗.

14.Choose [ OK ] and press ⋖ ⋗.

15. Turn the ⋖ ⋗ dial to choose [ New settings ], Choose [ OK ] and press ⋖ ⋗.

16. Turn the ⋖ ⋗ dial to choose [ Camera access point mode ], press ⋖ ⋗.

17. Turn the ⋖ ⋗ dial to choose [ Easy connection ], Choose [ OK ] and press ⋖ ⋗.

18. Choose [ OK ] and press ⋖ ⋗.

19. Choose [ OK ] and press ⋖ ⋗.

20. Turn the ⋖ ⋗ dial to choose [ New settings ], Choose [ OK ] and press ⋖ ⋗.

21. The SSID ( ) and password ( ) will be displayed on the screen.

22. Open [ Settings ] on the iPad, select [ Wi-Fi ] to confirm the SSID is the same as the one displayed on the camera screen, and tap to select.

23. Input the same Password as displayed on the camera ( ) and tap [ Join ] ( ).

24. Go to home screen, and open Camera Connect.

Caution

25. Tap the camera to connect.

26. Confirm that [ Operate the camera to establish a connection ] is displayed.

27. Select [ OK ] and press ⋖ ⋗.

28.press ⋖ ⋗.

29. Tap [ Images on camera ] .

30. Tap [ Select ].

31. Tap on the imported images to select images.

Selected images will have a displayed ( ).

Tap on [ ] to select all.

After selecting, tap ().

32. Tap [Digital Photo Professional Express], to choose and tap [ Select ].

33. Select image size, and tap [ OK ].

34. The selected images will be imported into Digital Photo Professional Express.

35. Once the images have been imported, tap [ Open linked app ].

36. Tap [ Yes ].

37. Digital Photo Professional Express will open, tap [ OK ].

38. The imported images will be displayed in the thumbnails screen in Digital Photo Professional Express.

Virtual Keyboard Operations

Use the virtual keyboard operation to enter information. Note that the length and type of information you can enter varies depending on the function you are using.

	Input area, for entering text		Switch input modes
	Cursor keys, for moving in the input area		Space
	Current no. of characters/no. available		Delete a character in the input area
	Keyboard		Finish the text entry

Caution

Use ⋖ ⋗ or the ⋖ ⋗ or ⋖ ⋗ dial to move within and -

Press ⋖ ⋗ to confirm input or when switching input modes.