EOS-1D X Mark II Firmware Version 1.1.7 [Mac OS X]
Content Id: 0400503503
Firmware Version 1.1.7 fixes the following issues:
1. The camera may not connect to a network when using an Ethernet cable to connect to a Wi-Fi mobile hotspot. 2. The camera may not connect to a network in certain network environments. 3. The camera cannot connect to a 5GHz network when the SSID is hidden. 4. A PTP communications vulnerability. 5. A vulnerability related to firmware update.
The Version 1.1.7 firmware being released at this time is for cameras with Firmware Version 1.1.6 or earlier. If the camera's firmware is already Version 1.1.7, it is not necessary to update the firmware. When updating the firmware of your camera, please first go over the instructions thoroughly before you download the firmware. The firmware update takes approximately six minutes.
Note: (1) Once the EOS-1D X Mark II is updated to Version 1.1.2 (or later), it cannot be restored to a previous firmware version (Version 1.0.0 to 1.0.2). (2) Camera settings files created using a camera running Firmware Version 1.0.2 (or earlier) cannot be used on a camera running Firmware Version 1.1.2 (or later). (3) Please use the latest EOS Utility version with the EOS-1D X Mark II after the camera has been updated to Firmware Version 1.1.2 (or later). The latest version of EOS Utility can be downloaded from Canon’s Web site. EOS Utility Version 3.5.00 or later support cameras running Firmware Version 1.1.2 (or later) (4) Accompanying functional improvements of Firmware Version 1.1.2 (or later), the instructional manual has been revised. The latest version of the instruction manual can be downloaded from Canon’s Web site, so please download the instruction manual together with the new firmware. (5) When using Version 4.7.10 (or earlier) of Digital Photo Professional to edit JPEG/RAW images captured with a camera updated to Firmware Version 1.1.4 (or later), some of the Exif data may be deleted. In addition, chromatic aberration correction, peripheral illumination correction, distortion correction, and Digital Lens Optimizer cannot be used when processing RAW images captured using a TS-E lens (TS-E17mm F4L, TS-E24mm F3.5L II, TS-E50mm F2.8L Macro, TS-E90mm F2.8L Macro, or TS-E135mm F4L Macro). Please be sure to update Digital Photo Professional to Version 4.7.20 (or later) before performing image processing.
Q&A: Preparations for a firmware update: After the downloaded compressed file (.dmg file) is extracted, a firmware folder is created.
*Extracting the downloaded file: The downloaded folder is automatically extracted, and a firmware folder is created. If the download folder cannot be automatically extracted, double-click the folder.
The extracted folder contains the firmware (File name: 1DX20117.FIR, File size: 41,777,088 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).
Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
(The following is the history of past firmware updates) Changes in Version 1.1.6: 1. Fixes a phenomenon in which the camera may not function normally when images are simultaneously displayed on the camera’s LCD monitor and an external monitor (via HDMI output).
Changes in Version 1.1.4: 1. Support has been added for chromatic aberration correction, peripheral illumination correction, distortion correction, and Digital Lens Optimizer when using Digital Photo Professional to process RAW images captured with the following TS-E lenses: TS-E 17mm f/4L, TS-E 24mm f/3.5L II, TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO. 2. Fixes a phenomenon in which standard exposure may not be obtained, or an irregular exposure may result, when Silent LV (Live View) shooting with the following TS-E lenses: TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO. 3. Support for Exif 2.31 has been added.
Changes in Version 1.1.3: 1. Corrects a phenomenon in which the drive mode icon is not correctly displayed when using custom shooting modes (C1/C2/C3). 2. Changes the maximum number of "Release cycles" displayed from 1,000,000 cycles to 9,999,000 cycles. This value can be checked under the "Camera system information" menu. 3. Improves the reliability of communication via USB cable when using the Lens Data Registration function within EOS Utility 3 software.
Changes in Version 1.1.2: 1. The addition of a selectable color-tone option for the LCD monitor. 2. The addition of a function to append IPTC data. 3. The addition of a function to transfer only protected images. 4. The addition of a function to set the GPS positional data retention period. 5. An increase in the number of network connection settings that can be saved to a memory card from 20 to 40. 6. When retrying FTP transfer, extension of the minimum auto power off time to 10 minutes. 7. Improvement of wireless transmission when using Wireless File Transmitter WFT-E6.
Changes in Version 1.0.2: 1. Incorporates countermeasures for a phenomenon in which the bottom part of still images recorded to SanDisk CFast cards become corrupted. 2. Enhances communication reliability between the camera and CFast cards.
If you are using the affected CFast cards, after having updated the camera firmware to Firmware Version 1.0.2 (or later), please make sure to use the camera to format the CFast card.
Please note that when using the SanDisk CFast cards listed below with the EOS-1D X Mark II, the bottom part of still photos may become corrupted. Affected CFast Cards: - SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxx) - SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxx) - SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxxA) - SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxxA) - SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxxB) - SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxxB) *The "xxx" at the end of the product number varies depending on the sales region.
When using the affected CFast cards with the EOS-1D X Mark II, follow the steps below. 1: Check whether the firmware version of the EOS-1D X Mark II is Version 1.0.2 or later. If the firmware version of the camera is Version 1.0.0, update the firmware to Version 1.0.2 or later. 2: Format the affected CFast card with the EOS-1D X Mark II with firmware version 1.0.2 or later.
Note that when using a CFast card formatted according to the above step 2, the following operations will take place. - An "ImgSaver.bin" file of several MB in capacity will be created in the "MISC" folder on the card. Do not move or delete the folder or the file on the card. - When opening the card slot cover, the access lamp may remain lit or blink for a longer duration. Remove the card only after having confirmed that the access lamp is off. When the access lamp is lit or blinking, recording to the card is in progress. Never perform the operations below when the access lamp is lit or blinking as doing so may result in corrupted image data or may cause damage to the card or the camera. - Removing the card - Removing the battery pack - Applying vibration or shock to the camera - Unplugging and replugging the power cord (when using the separately-sold household power outlet accessories)
When using SanDisk CFast cards, to fully utilize the card performance, use the refresh tool provided by SanDisk before formatting the card with a camera with the above step 1 applied. Refresh tool: http://kb.sandisk.com/app/answers/detail/a_id/17370
In addition, if an affected SanDisk CFast card has already been formatted with a computer or another device, please format the card again with a camera with the above step 1 applied.
About the "Refresh Tool" of SanDisk cards: Q1: Whenever the camera is used to format a SanDisk CFast card, is it mandatory to use the refresh tool? If the refresh tool is not used, will the bottom part of still images become corrupted? A1: The refresh tool is not related to image corruption that appears at the bottom part of still images. We are informing users about this tool as SanDisk recommends regular use of the refresh tool when using SanDisk CFast cards. For details about the use of the refresh tool, please inquire with SanDisk. Q2: How often does the refresh tool have to be used? A2: For details about use frequency, and the use of the refresh tool, please inquire with SanDisk. Q3: What will happen to camera operations if I continue using a SanDisk CFast card without using the refresh tool? A3: The speed for continuous data writing may decrease. If the data writing speed seems to have decreased during high-speed continuous shooting, please try to use the refresh tool to alleviate the problem. For any other technical questions concerning CFast cards, please inquire with SanDisk.
File Name : eos1dx2-v117-mac.dmg File Type : FA File Size : 43840394KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.