Canon Group
Close Close
Menu Menu Close Close Search
Front image of Canon EOS C200
EOS C200 Support
Drivers & downloads

Canon Digital Cinema Camera EOS C200 / EOS C200B Firmware Version 1.0.8.1.00 [macOS]

Content Id: 0400592802


Description



Detail

Firmware Version 1.0.8.1.00 incorporates the following fix.

1. Fixes a phenomenon that may result in images not being displayed when a LM-V2 monitor is connected to the camera.

Version 1.0.8.1.00 includes the same functions and functional improvements as Version 1.0.7.1.00. Details of the functions and functional improvements added in Version 1.0.7.1.00 are as follows.

1. Compatible with EF Cinema Lens CN 10 x 25 IAS S/E1.
- Peripheral illumination / chromatic aberration correction has been added.
- Enable autofocus with Dual Pixel CMOS AF.
- Added support for "Dual Pixel Focus Guide" feature.
2. The ability to update the SDI/HDMI output from 59.94P to 29.97P (or 23.98P) has been added.
3. Simultaneous output of HDMI connector and 3G-SDI connector is supported.
4. Kelvin has been added to the color temperature step setting.


Caution:
- Firmware version 1.0.8.1.00 is for updating Cinema EOS C200 cameras running firmware version 1.0.0.1.00 - 1.0.7.1.00. If your camera's firmware is already version 1.0.8.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
- Please refrain from loading menu settings generated using the most recent firmware version to a product running an old firmware version, as doing so may affect camera operations.


Preparations for the Firmware Update:
- You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD / SDHC / SDXC memory card that is 512MB or more for the firmware update.
- After the firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
- The downloaded folder contains the firmware (file name: VNC8.FIM / file size: 39,811,712 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.


The following items are required to perform this firmware update:
1. An EOS C200 / EOS C200B camcorder
2. A computer (OS requirements: macOS 10.7 - 10.15)
3. SD/SDHC/SDXC memory card with a capacity of 512MB or more (commercially available)
4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
5. A fully charged battery pack for the camera
6. Compact power adapter bundled with the camera
7. The firmware (the downloaded file)


History:
Changes in Firmware Version 1.0.7.1.00:
1. Compatible with EF Cinema Lens CN 10 x 25 IAS S/E1.
- Peripheral illumination / chromatic aberration correction has been added.
- Enable autofocus with Dual Pixel CMOS AF.
- Added support for "Dual Pixel Focus Guide" feature.
2. The ability to update the SDI/HDMI output from 59.94P to 29.97P (or 23.98P) has been added.
3. Simultaneous output of HDMI connector and 3G-SDI connector is supported.
4. Kelvin has been added to the color temperature step setting.

Changes in Firmware Version 1.0.6.1.00:
1. Support for the separately-sold LCD Monitor LM-V2 has been added.

Changes in Firmware Version 1.0.5.1.00:
1. A Continuous Recording function has been added allowing for nonstop recording.*1
2. Peripheral illumination / chromatic aberration correction has been added for the following lenses:
- EF Cinema Lens: CN-E20mm T1.5 L F
- EF Lens: EF 70-200mm f/4L IS II USM
3. For LUTs that can be applied to output footage, official support for the ITU-R BT.2100 standard and ITU-R BT.2408 report have been added for the following terminals:.
- SDI terminal
- HDMI OUT terminal
Changes have been made so that the [HDR: PQ] and [HDR: HLG] base luminance corresponds to Diffuse White (100%) being 203nits*2.
4. Support for the [Reset] function that resets the clip number when the reel number is set, has been added.
5. When using an assignable button, the White Balance setting will be maintained after the power has been turned off.
6. Fixes a phenomenon that occurs on cameras with firmware versions 1.0.3.1.00 to 1.0.4.1.00 in which resolution appears to be reduced in SD card recordings and in external outputs when shooting with specific menu settings*3.
*1 When using the continuous recording function, only MP4 format/1920x1080 resolution is possible.
*2 The HLG output is the brightness in the case of displaying on a 1000nits monitor.
*3 Specific menu settings:
- When [Resolution/Color Sampling] is set to [3840x2160 YCC420 8 bit].
- When [Resolution/Color Sampling] is set to [1920x1080 YCC420 8 bit], and [Slow Motion Recording] is activated.
- When [Resolution/Color Sampling] is set to [1920x1080 YCC420 8 bit], and the digital tele-converter and EF-S lens correction are activated.

Changes in Firmware Version 1.0.4.1.00:
1. Fixes image quality degradation, such as color misalignment or edge distortion, may occur in the recorded footage when using the following combination of settings:
- recording format XF-AVC
- frame rate 59.94i / 50.00i
- 1920x1080 resolution
2. Optimizes the [Black Gamma] compensation when [Normal 1] to [Normal 4] is set for [Gamma] in the Custom Picture settings.
3. Optimizes color accuracy in areas of high brightness when [Normal 1] to [Normal 4] is set for [Gamma] in the Custom Picture settings.

Changes in Firmware Version 1.0.3.1.00:
1. XF-AVC format recording has been added*1* 2* 3* 4.
2. Retrieval of lens metadata, such as focal length, is now supported during XF-AVC recording.
3. Hybrid Log Gamma HDR ITU-R BT.2100 output has been added.
4. Sensitivity adjustment has been added for the LM-V1 LCD Monitor.
5. LPCM 24-bit audio recording has been added when recording in the Cinema RAW Light format*5.
6. 4X magnification has been added.
7. A PsF output function from SDI and HDMI has been added during progressive internal recording.
8. A digital tele-converter function has been added (1.5x, 3.0x, and 6.0x).
9. Auto IRIS support has been added for the following lenses:
- EF-S 35mm f/2.8 Macro IS STM
- EF 85mm f/1.4L IS USM
10. Peripheral illumination/chromatic aberration correction has been added for the following lenses:
- EF 70-300mm f/4-5.6 IS II USM
- EF 16-35mm f/2.8L III USM
- EF-S 18-55mm f/4-5.6 IS STM
- EF-S 35mm f/2.8 Macro IS STM
- EF 85mm f/1.4L IS USM
11. The reproducibility of bright areas has been enhanced when the gamma setting is from Normal 1 to 4.
12. Browser remote setting options are retained after switching off the camera.
*1 Please use the following software applications:
Canon XF Utility 3.3 for macOS
Canon XF Plugin 3.3 for Avid Media Access (macOS)
*2 You will need to format the SD cards completely with the camera before recording.
*3 For detailed information about SD cards that have been verified to work with this camera, please visit Canon's Web site.
*4 Please use the following software applications:
Cinema RAW Development 2.2 for macOS
Canon RAW Plugin 2.1 for Avid Media Access (macOS)
Canon RAW Plugin 1.1 for Final Cut Pro X

Changes in Firmware Version 1.0.2.1.00:
When CN-E70-200mm T4.4 L IS KAS S is attached the following features are enabled:
- Autofocus using the Dual Pixel CMOS AF function
- Dual Pixel Focus Guide function.
- The joystick on the camera's grip unit can be set to operate the zoom.
- Manual control of the iris with Camera's Control dial.
- Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
- Automatic aperture and push auto iris functions.
- Start/stop recording on the separately-sold lens grip ZSG-C10.
- Retrieval of Lens metadata, such as the model name and the focal distance will display on the camera.
- Peripheral illumination / chromatic aberration correction.

Changes in Firmware Version 1.0.1.1.00:
1. Fixes a phenomenon in which the start time code is not correctly displayed when MP4 clips captured at 59.94P/50.00P frame rate are imported into NLE software.
*RAW clips are not affected.

File information


File Name : c200-v1081-mac.dmg
File Type : FA
File Size : 33893145KB