Product image of PowerShot SX740 HS
PowerShot SX740 HS Support
FAQs & troubleshooting

What to do when the PC does not recognize the camera when connected by a USB cable (Windows 10) (PowerShot SX740 HS) (PowerShot SX70 HS)

Content Id: 8204028300


When the camera is connected to a Windows 10 operated computer, and the computer does not recognize the camera, follow the instructions in order.

Caution

Importing problems may occur if there are too many images (more than 1,000) on the memory card.

In this case, use a memory card reader to import the images.

1. Try connecting the camera to a different USB terminal.

If there are multiple USB terminals on your computer, connecting the cable to a different USB terminal may allow the camera to be recognized by the computer.

2. Change the USB cable connecting the camera to the computer.

The computer should recognize the camera once the USB cable is changed and reconnected to the computer. Use a cable that has a Micro-B plug for the camera. A genuine Canon accessory is also available (Interface Cable IFC-600PCU).

3. Try using the Device Manager

If you reconnect the camera and the computer with a USB cable and try to detect the camera again after deleting the camera information using the Device Manager, the camera will sometimes be detected correctly.

Caution

Leave your computer and camera connected through the USB cable.
Connect the computer and the camera, and turn the power on the camera off and on again.

1. Click [File Explorer] in the taskbar in the lower-left part of the screen.

2. Select and right-click [This PC] () on the displayed screen, and click [Properties] ().

3. Click [Device Manager] in the upper-left corner of the screen.

4. Double-click [ Portal Devices ] on the [ Device Manager ] screen.

5. Select the device name of your camera (), click [ ] () and delete the information from the device.

Caution

If camera name is not displayed, go to step 7.

6. Click [OK].

The information about your camera will be deleted from the Device Manager.

7. Click [ ] (Scan for hardware changes).

Caution

If camera name is not displayed even after clicking on [ ] ( Scan for hardware changes ) , there is a possibility of other issues. Try using the cardslot or card reader instead. See Related information for more details.

8. If the camera is recognized, the following screen will be displayed.

Caution

For information on transferring images to the computer, see Related information.

"Was this helpful?"