Close
Follow the steps below to configure the flash settings.
Fires for each shot (Flash on)
If you set the flash to [Auto flash], the flash will not fire in bright environments. However, if for example you take a shot of people against a backlight, the flash will fire even when you shoot in daylight to prevent the faces from becoming obscured.
The instructions below refer to the setting that makes the flash fire for each shot (Flash on).
Caution
].Caution
[ 
1. Turn the camera on.
2. Move the 
3. Press the 
4. The flash setting screen will appear.
Press the 
Caution
You can select one of the following 4 flash modes.
For details on the available shooting modes, refer to the Camera User Guide.
[ Auto flash : 
[ Flash on : 
[ Slow Synchro : 
[ Flash off : 
Flash Range
If your shots are dark despite the flash firing, move closer to the subject.
See the table below for details on the flash range.
Maximum Wide Angle :  | approx. 50 cm (1.6 ft.) - approx. 5.0 m (16.4 ft.) |
Maximum Telephoto :  | approx. 2.0 m (6.6 ft.) - approx. 2.5 m (8.2 ft.) |